This resource includes bathymetry data acquired during the Shellharbour Tharawal marine survey collected by the NSW government (Department of Planning and Environment – DPE) during the period 25 May – 30 November 2017 onboard the RV Bombora using DPE’s R2Sonic 2022 multibeam sonar. The Shellharbour bathymetry survey was led by Dr. Bradley Morris (DPE Coasts and Marine) as part of SeabedNSW program funded by NSW Coastal Reforms package. The purpose of the project was to 1) provide a baseline dataset and 2) map the spatial distribution of seabed types. The data will provide a better understanding of nearshore sediment distribution/transport mechanisms for improved assessment of threats/risks associated with erosion events (i.e. East Coast Lows) and changing sea levels. This dataset contains a 32-bit floating point geotiff file of backscatter (5m gridded) for the study area, derived from the processed R2Sonic 2022 multibeam data, using Hypack, R2Sonic GUI, POSView, POSPac, Qimera and FMGT software. A detailed report on the survey is provided in: i) AusSeabed Survey Report and ii) NSW DPE Scientific Rigor Statement NSWENV_20171130_Shellharbour_MB_ScientificRigour.pdf. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the Senior Team Leader and the department’s Hydrosurveyor, Coasts and Marine Science, NSW Dept. Planning and Environment.

This flythrough highlights canyon environments within the Gascoyne Marine Park offshore northwestern Australia. The Cape Range Canyon is a relatively narrow, linear canyon that initiates on the continental slope, but is connected to the shelf via a narrow channel. The walls of the canyon are steep and reveal a history of slumping and retrogressive failure, that have broadened the canyon over time. The floor contains a series of deep plunge pools, indicative of the action of sediment-laden turbidity currents in further eroding this canyon. Epibenthos within the canyons was relatively sparse and likely regulated by disturbance associated with sedimentation in the canyons. Rock overhangs often supported the highest densities of benthic suspension feeders, including glass sponges, octocorals, and ascidians. Bathymetry data and seafloor imagery for this flythrough was collected by the Schmidt Ocean Institute during survey FK200308. Funding was provided by Schmidt Ocean Institute, Geoscience Australia, the Australian Government’s National Environmental Science Program (NESP) Marine Biodiversity Hub, the Director of National Parks, and the Foundation for the WA Museum through a Woodside Marine Biodiversity Grant.

The Northern Approaches to Broome multibeam survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Bhagwan K during the period 05 August– 02 October 2020. This was a contracted survey conducted by EGS as part of the Hydroscheme Industry Partnership Program. The survey area encompasses the northern approaches to Broome, WA located between the Talboys Rock and Gantheaume Point, Western Australia. Bathymetry data was acquired using a Kongsberg EM2040D 200-400 kHz and processed using QPS QINSy 9.2.3 processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area. <BR>This dataset is not to be used for navigational purposes.

The Great North Channel Torres Strait Multibeam survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Offshore Guardian and MV Special Order during the period 04 February– 14 April 2021. This was a contracted survey conducted by Guardian Geomatics as part of the Hydroscheme Industry Partnership Program. The survey area encompasses the Great North East Channel of the Torres Strait located between the Stephens Island, Pearce Cay and Rennel Island, Queensland. Bathymetry data was acquired using a Kongsberg EM2040-07 and Norbit iWBMSh Stx 200-400 kHz and processed using CARIS HIPS & SIPS 11.3 processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area. <BR>This dataset is not to be used for navigational purposes.

​The King Island North, Bass Strait, bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the M/V Pacific Quest during the period 28 January to 6 May 2021. This was a contracted survey conducted as part of the HydroScheme Industry Partnership Program (HIPP). The survey area encompasses a region located north of King Island in Bass Strait, including the approaches to Phoques Bay, located at the NW extremity of King Island. Bathymetry data was acquired using a Kongsberg EM2040D and processed using QPS Qimera V2.0.1. The dataset was then exported to GeoTIFF using CARIS HIPS and SIPS software. This dataset contains a 30m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the survey area. This dataset is not to be used for navigational purposes.

This resource includes bathymetry data acquired during the Recherche Archipelago 2005 bathymetry survey collected using a Reson SeaBat 8125 multibeam sonar system by Curtin University of Technology (CUT) and Geoscience Australia (GA) on the charter vessel Firebird during the period 5th – 14th May, 2005. The survey was undertaken as a collaborative project between CUT and GA under the Coastal Water Habitat Mapping (CWHM) Project within Coastal Cooperative Research Centre Program. The purpose of the project was to build baseline information for benthic habitats within the study area. This V1 dataset contains a 2m resolution 32-bit floating point geotiff file of the Recherche Archipelago bathymetry, derived from the processed Reson SeaBat 8125 bathymetry data, using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

This resource includes bathymetry data acquired during the Shellharbour Tharawal marine survey collected by the NSW government (Department of Planning and Environment – DPE) during the period 25 May – 30 November 2017 onboard the RV Bombora using DPE’s R2Sonic 2022 multibeam sonar. The Shellharbour bathymetry survey was led by Dr. Bradley Morris (DPE Coasts and Marine) as part of SeabedNSW program funded by NSW Coastal Reforms package. The purpose of the project was to 1) provide a baseline dataset and 2) map the spatial distribution of seabed types. The data will provide a better understanding of nearshore sediment distribution/transport mechanisms for improved assessment of threats/risks associated with erosion events (i.e. East Coast Lows) and changing sea levels. This dataset contains 2 x 32-bit floating point geotiff files of bathymetry (2m and 5m gridded) for the study area, derived from the processed Hypack, R2Sonic GUI, POSView, POSPac and Qimera software. A detailed report on the survey is provided in: i) AusSeabed Survey Report and ii) NSW DPE Scientific Rigor Statement NSWENV_20171130_Shellharbour_MB_ScientificRigour.pdf. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the Senior Team Leader and the department’s Hydrosurveyor, Coasts and Marine Science, NSW Dept. Planning and Environment.

This collection contains all national level bathymetry grids held by Geoscience Australia (GA) dating back to survey data obtained since 1993. <b>Value: </b>Bathymetry data is used for a wide range of marine applications including: navigation, environmental assessment, jurisdictional boundaries, resource exploration. <b>Scope: </b>Data holdings lying within the offshore area of Australia, including international waters. <b>To access the AusSeaBed Marine Data Portal</b> use the following link: <a href="https://portal.ga.gov.au/persona/marine#/">https://portal.ga.gov.au/persona/marine#/</a>

This resource includes bathymetry data acquired during the Refuge Cove bathymetry survey acquired by Deakin University Marine Mapping Lab during the period of 07 – 11 June 2013 onboard the MV Yolla using a Kongsberg Maritime EM2040C multibeam sonar. The Refuge Cove bathymetry survey was led by Dr. Daniel Ierodiaconou (Deakin University). This dataset contains a 1m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the study area, derived from the processed EM2040C bathymetry data, using CARIS HIPS and SIPS software. The elevation datum is shifted to EGM2008 at Geoscience Australia. Detailed information on this survey is provided in: Ierodiaconou, D., Schimel, A. C., Kennedy, D., Monk, J., Gaylard, G., Young, M., Diesing, M. & Rattray, A. (2018). Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters. Marine Geophysical Research, 39(1), 271-288. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

This resource includes bathymetry data acquired during the Keppel Bay 2004 bathymetry survey. Data were collected using a Reson SeaBat 8125 multibeam sonar system by Curtin University of Technology (CUT), Defence Science and Technology Organisation (DSTO) and Geoscience Australia (GA) on the charter vessel Rum Rambler during the period 20th – 26th September 2004. The survey was undertaken as a collaborative project between CUT, DSTO and GA under the Coastal Water Habitat Mapping (CWHM) Project within Coastal Cooperative Research Centre Program. The purpose of the project was to build baseline information for benthic habitats within the study area. This V1 dataset contains a 1m resolution 32-bit floating point geotiff file of the bathmetry of target areas in Keppel Bay, derived from the processed Reson SeaBat 8125 bathymetry data, using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.