Authors / CoAuthors
Radke, L. | Tsang, J. | Byass, J. | Tubby, J.
Abstract
This resource contains surface sediment data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and Department of Land Resource Management (Northern Territory Government) during the period from 2-29 May 2016 on the RV Solander (survey SOL6432/GA4452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; 2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. This dataset comprises total sediment metabolism, carbonate and element concentrations and C and N isotopes measurements made on seabed sediments. A detailed account of the survey is provided in Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T., 2016. Bynoe Harbour Marine Survey 2017: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. Thanks to the crew of the RV Solander for help with sample collection, Matt Carey, Craig Wintle and Andrew Hislop from the Observatories and Science Support at Geoscience Australia for technical support and Jodie Smith for reviewing the data. This dataset is published with the permission of the CEO, Geoscience Australia.
Product Type
dataset
eCat Id
108008
Contact for the resource
Custodian
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Digital Object Identifier
Keywords
-
- Marine survey
-
- Marine Baselines
-
- Continental shelf
-
- Seabed
-
- Geochemistry
-
- Published_External
Publication Date
2017-04-24T11:00:00
Creation Date
2017-04-05T14:30:00
Security Constraints
Legal Constraints
Status
Purpose
Maintenance Information
asNeeded
Topic Category
geoscientificInformation
Series Information
Lineage
Bottom sediments were collected using a Smith McIntyre Grab. The surface sediments (0-2 cm) within each grab were spooned into falcon vials and the pore waters were removed by centrifugation. Pore waters were removed within 20 minutes of collection, and salinity, temperature and pH measurements were taken. The pore waters were then filtered (0.45 µm) into 3 ml gas-tight vials (that were pre-charged with 0.025 HgCl2). The procedure was repeated on pore waters from a second bulk sample that was incubated for ~24 hrs at sea surface temperatures. The samples were then frozen for transport to the laboratories at Geoscience Australia (GA) where they were: (1) subsampled for specific surface area analysis; and (2) freeze-dried and ground in a tungsten carbide mill. The dried residue was divided into fractions for: (i) major and trace element analysis; (ii) bulk carbonate analyses; and (ii) total organic carbon and total nitrogen concentrations and isotopic ratios (after de-carbonation). Dissolved inorganic carbon (DIC) concentrations were determined on pore water samples using a DIC analyser and infrared-based CO2 detector (Geoscience Australia). CO2 production rates were calculated by concentration differences over the incubation period, after correction for CaCO3 fluxes. The average %RSD of the precisions and accuracies of the dissolved inorganic carbon measurements were 0.2. The accuracy of the wet/dry weight used in the calculations were better than 1%. Bulk carbonate was determined on dried ground sediment using the carbonate bomb method. The average precision (%RSD +/- s.d.) for 11 samples run in duplicate was 1.6 +/- 1.7%. Specific surface areas were determined using a 5-point Brunauer-Emmett-Teller (BET) adsorption isotherm on a Quantachrome NOVA 2200e analyser, with nitrogen used as the adsorbate. The samples were first cleaned of organic matter by slow heating for 12 hours to 350oC. Major and trace elements were determined in GA laboratories using X-Ray fluorescence (XRF; Phillips PW204 4kW sequential spectrometer) and ICP-MS (AGILENT 7500ce). Two Certified Reference Materials (CRMs) called CH-1 (Marine Sediment; Institute of Rock and Mineral Analysis, Beijing) and WG-1 (Woodstock Basalt; Australian National University, Canberra) were run in triplicate to calculate accuracy. Ten to twelve samples were also analysed in duplicate to measure precision. The accuracy and precision information is presented on element by element basis in accompanying spreadsheet. De-carbonated powders were sent to Environmental Isotopes Pty Ltd (Sydney) for isotopic analysis by mass spectrometry. Samples were back-corrected to account for the carbonate removal, using carbonate concentrations derived from the bomb method (this dataset). Error estimates for the C and N isotope values are ±0.15.
Parent Information
Extents
[-12.63555, -12.52312, 130.26486, 130.55103]
Reference System
Spatial Resolution
Service Information
Associations
Source Information