The dataset was created by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the historical Australian Maritime Boundary Dataset 2006 (AMB2006). This version contains a number of technical amendments made on the basis of user feedback. These include: - Harmonisation of maritime boundaries, scheduled area and graticular block datasets in block SC51 The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be known to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: - Parent 1 Million Mapsheet - Offshore Area - Epoch of the boundaries used to cut the data AMB2006 - Datum - Origin of the mapsheet in AGD66 - The position of all vertices in the block - The number of vertices in the block - The area of the block in acres - The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

PLEASE NOTE: These data have been updated. See Related Links for new data. Australian Petroleum Blocks (2001) - Aligned with the historical Australian Maritime Boundary Dataset (AMB2001) The digital realisation of Australia's Graticular Framework as set out under the Offshore Petroleum and Greenhouse Gas Storage Act 2006. Web Service Capabilities WMS,WFS,WCS. The dataset was created internally by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the current Australian Maritime Boundary Dataset (AMB2001). The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be know to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: Block ID Parent 1 Million Mapsheet Offshore Area Epoch of the boundaries used to cut the data - AMB2001 Datum Origin of the mapsheet in AGD66 The position of all vertices in the block The number of vertices in the block The area of the block in acres The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

The AusSeabed Marine Data Portal provides openly accessible seabed data to users. This report details the results and recommendations following a community survey on the portals functionality and usability. The report informs future development of the AusSeabed Marine Data Portal to ensure it meets end-user needs.

PLEASE NOTE: These data have been updated. See Related Links for new data. Geodatabase of the Commonwealth Coastal Waters (State/Territory Powers) Act 1980 - An Act to extend the legislative powers of the States/Northern Territory in and in relation to coastal waters.

The dataset was created by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the historical Australian Maritime Boundary Dataset 2006 (AMB2006). This version contains a number of technical amendments made on the basis of user feedback. These include: - Harmonisation of maritime boundaries, scheduled area and graticular block datasets in block SC51 The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be known to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: - Block ID - Parent 1 Million Mapsheet - Offshore Area - Epoch of the boundaries used to cut the data AMB2006 - Datum - Origin of the mapsheet in AGD66 - The position of all vertices in the block - The number of vertices in the block - The area of the block in acres - The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

Geoscience Australia has the primary role in the delineation of Australia's domestic and international maritime limits and boundaries. An output of this activity is the development of the Australian Maritime Boundaries (AMB) data. AMB2014 is a GIS data product, replacing AMBIS 2006, providing access to the data for Australia's maritime zones. Offshore Petroleum and Greenhouse Storage Act 2006 - Australian Maritime Boundaries Dataset 2014 is a digital representation of the scheduled and offshore areas defined under this Act. In the event of an inconsistency between AMB data and the limits under any legislation, the latter prevails. The data have been published by Geoscience Australia in consultation with other relevant Commonwealth Government agencies including the Attorney-General's Department, the Department of Foreign Affairs and Trade and the Australian Hydrographic Office. This version contains a number of technical amendments made on the basis of user feedback. These include: - Harmonisation of maritime boundaries, scheduled area and graticular block datasets in block SC51 Offshore Petroleum and Greenhouse Storage Act 2006 - Australian Maritime Boundaries Dataset 2014 comprise the scheduled and offshore areas defined under the Act. AMB Data can also be viewed on-line via AMSIS (http://www.ga.gov.au/marine/jurisdiction/amsis.html). Product Specifications Coverage: Australia including all external territories Currency: May 2014. Coordinates: Geographical Datum: GDA94 (functionally equivalent to WGS84). Format: ESRI Geodatabase and REST web service - free online. The area of coverage of the AMB data is for the whole of the Australian marine jurisdiction which includes waters adjacent to the mainland, offshore islands and External Territories. The geographical extent is approximately between the latitude limits of 8 S to 70 S and the longitude limits 39 E to 174 E. This dataset includes the following disclaimers: AMB data is a digital representation of the territorial sea baseline and of the outer limits of Australia's maritime zones. The baseline and zones are established under the Offshore Petroleum and Greenhouse Storage Act 2006. In the event of an inconsistency between AMB data and the areas under the legislation, the latter prevails.

Australian Petroleum Blocks (2001) - Aligned with the historical Australian Maritime Boundary Dataset (AMB2001) The digital realisation of Australia's Graticular Framework as set out under the Offshore Petroleum and Greenhouse Gas Storage Act 2006. ESRI Geodatabase. The dataset was created internally by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the historic Australian Maritime Boundary Dataset (AMB2001). The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be know to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: Block ID Parent 1 Million Mapsheet Offshore Area Epoch of the boundaries used to cut the data - AMB2001 Datum Origin of the mapsheet in AGD66 The position of all vertices in the block The number of vertices in the block The area of the block in acres The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

The dataset was created by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the current Australian Maritime Boundary Dataset 2020 (AMB2020). The 2020 release has been updated to reflect the 2018 Timor Sea Treaty. Available for download in GDA94 or GDA2020. The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be known to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. The blocks are attributed with fields containing information on: - Block ID - Parent 1 Million Mapsheet - Offshore Area - Epoch of the boundaries used to cut the data AMB2014 - Datum - Origin of the mapsheet in AGD66 - The position of all vertices in the block - The number of vertices in the block - The area of the block in acres - The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

Australian Mineral Blocks (2014) - Aligned with the current Australian Maritime Boundary Dataset (AMB2014). ESRI Geodatabase. The dataset was created by Geoscience Australia using the framework described in Section 17 of the Offshore Minerals Act 1994. The international, scheduled areas and coastal waters used in this dataset are those found in the current Australian Maritime Boundary Dataset 2014 (AMB2014). The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be known to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. The blocks are attributed with fields containing information on: Block ID Parent 1 Million Mapsheet Offshore Area Epoch of the boundaries used to cut the data AMB2014 Datum Origin of the mapsheet in AGD66 The position of all vertices in the block The number of vertices in the block The area of the block in acres The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the Offshore Minerals Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.

Australian Petroleum Blocks (2006) - Aligned with the historical Australian Maritime Boundary Dataset (AMB2006) V2.0 The digital realisation of Australia's Graticular Framework as set out under the Offshore Petroleum and Greenhouse Gas Storage Act 2006. Web Service Capabilities WMS,WFS,WCS. The dataset was created internally by Geoscience Australia using the framework described in Section 33 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGS Act) and previous Acts. The international, scheduled areas and coastal waters used in this dataset are those found in the current Australian Maritime Boundary Dataset (AMB2006). The dataset is comprised of both polygons and points created to very high precision, accurate to within millimetres. The blocks have been cut by Australia's international boundaries, the scheduled areas and the coastal waters. Each block is assigned a polygon, including partial blocks. All blocks are titled with their block ID, and a list of vertices that make up the blocks. Each vertex of the dataset is also replicated as a discrete point in the points dataset. The design of the dataset allows for the exact location of every vertex to be know to millimetre precision. The corner coordinates of blocks are now defined to a high precision, and can be found by querying the appropriate point. Existing production licences AC/P17, AC/RL4, and AC/RL5 are included in the dataset. The blocks are attributed with fields containing information on: Block ID Parent 1 Million Mapsheet Offshore Area Epoch of the boundaries used to cut the data - AMB2006 Datum Origin of the mapsheet in AGD66 The position of all vertices in the block The number of vertices in the block The area of the block in acres The area of the block in hectares The calculation used to find the area of the blocks is estimated to be precise to better than 1%. This is considered to be sufficient as under the permit and licensing arrangements in the OPGGS Act, the area of a block has no relevance. Therefore the area figure is provided solely for reference.