This Central Australian Cenozoic Basins dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Cenozoic basins are an important source of readily accessible groundwater within the arid deserts of central Australia. This province represents a collection of six notable Cenozoic basins within the region, including the Ti Tree, Waite, Hale, Mount Wedge, Lake Lewis and Alice Farm basins. Many local communities in this region (such as Papunya, Ti Tree and Ali Curung) rely upon groundwater stored within Cenozoic basin aquifers for their water security. The basins typically contain up to several hundred metres of saturated sediments that can include relatively thick intervals of hydraulically conductive sands, silts and minor gravels. It is noted that the potential groundwater storage volumes in the Cenozoic basins are much greater than the annual amount of runoff and recharge that occurs in central Australia, making them prospective targets for groundwater development. Groundwater quality and yields are variable, although relatively good quality groundwater can be obtained at suitable yields in many areas for community water supplies, stock and domestic use and irrigated horticulture operations, for example, in the Ti Tree Basin. However, not all of the Cenozoic basins have the potential to supply good quality groundwater resources for community and horticultural supplies. With the exception of several small sub-regions, most of the Waite Basin has very little potential to supply good quality groundwater for agricultural use. This is mainly due to limited aquifer development, low yielding bores and elevated groundwater salinity (commonly >2000 mg/L Total Dissolved Solids). However, bores have been successfully installed for smaller-scale pastoral stock and domestic supplies and small communities or outstations in the Waite Basin.

This Surat Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Surat Basin is a sedimentary basin with approximately 2500 m of clastic fluvial, estuarine, coastal plain, and shallow marine sedimentary rocks, including sandstone, siltstone, mudstone, and coal. Deposition occurred over six cycles from the Early Jurassic to the Cretaceous, influenced by eustatic sea-level changes. Each cycle lasted 10 to 20 million years, ending around the mid-Cretaceous. Bounded by the Auburn Arch to the northeast and the New England Orogen to the southeast, it connects to the Clarence-Moreton Basin through the Kumbarilla Ridge. The Central Fold Belt forms its southern edge, while Cenozoic uplift caused erosion in the north. The basin's architecture is influenced by pre-existing faults and folds in the underlying Bowen Basin and the nature of the basement rocks from underlying orogenic complexes. Notable features include the north-trending Mimosa Syncline and Boomi Trough, overlying the deeper Taroom Trough of the Bowen Basin and extending southwards. The Surat Basin overlies older Permian to Triassic sedimentary basins like the Bowen and Gunnedah Basins, unconformably resting on various older basement rock terranes, such as the Lachlan Orogen, New England Orogen, and Thomson Orogen. Several Palaeozoic basement highs mark its boundaries, including the Eulo-Nebine Ridge in the west and the Kumbarilla Ridge in the east. Paleogene to Neogene sediments, like those from the Glendower Formation, cover parts of the Surat Basin. Remnant pediments and Cenozoic palaeovalleys incised into the basin have added complexity to its geological history and may influence aquifer connections. Overall, the Surat Basin's geological history is characterized by millions of years of sedimentation, tectonic activity, and erosion, contributing to its geological diversity and economic significance as a source of natural resources, including coal and natural gas.

This was the fourth of five presentations held on 31 July 2023 as part of the National Groundwater Systems Workshop - Detailed Groundwater Science Inventory Geology, hydrogeology and groundwater systems in the Kati Thanda-Lake Eyre Basin.

A compilation of thematic summaries of 42 Australian Groundwater Provinces. These consistently compiled 42 summaries comprise the National Hydrogeological Inventory. The layer provides the polygons for each groundwater province in the inventory and thematic information for each province, including location and administration information, demographics, physical geography, surface water, geology, hydrogeology, groundwater, groundwater management and use, environment, land use and industry types and scientific stimulus.

This Sydney Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Sydney Basin, part of the Sydney–Gunnedah–Bowen basin system, consists of rocks dating from the Late Carboniferous to Middle Triassic periods. The basin's formation began with extensional rifting during the Late Carboniferous and Early Permian, leading to the creation of north-oriented half-grabens along Australia's eastern coast. A period of thermal relaxation in the mid Permian caused subsidence in the Bowen–Gunnedah–Sydney basin system, followed by thrusting of the New England Orogen from the Late Permian through the Triassic, forming a foreland basin. Deposition in the basin occurred in shallow marine, alluvial, and deltaic environments, resulting in a stratigraphic succession with syn-depositional folds and faults, mostly trending north to north-east. The Lapstone Monocline and Kurrajong Fault separate the Blue Mountains in the west from the Cumberland Plain in the central part of the basin. The Sydney Basin contains widespread coal deposits classified into geographic coalfield areas, including the Southern, Central, Western, Newcastle, and Hunter coalfields. These coalfields are primarily hosted within late Permian strata consisting of interbedded sandstone, coal, siltstone, and claystone units. The coal-bearing formations are grouped based on sub-basins, namely the Illawarra, Tomago, Newcastle, and Wittingham coal measures, underlain by volcanic and marine sedimentary rocks. Deposition within the basin ceased during the Triassic, and post-depositional igneous intrusions (commonly of Jurassic age) formed sills and laccoliths in various parts of the basin. The maximum burial depths for the basin's strata occurred during the early Cretaceous, reaching around 2,000 to 3,000 metres. Subsequent tectonic activity associated with the Tasman Rift extension in the Late Cretaceous and compressional events associated with the convergence between Australia and Indonesia in the Neogene led to uplift and erosion across the basin. These processes have allowed modern depositional environments to create small overlying sedimentary basins within major river valleys and estuaries, along the coast and offshore, and in several topographic depressions such as the Penrith, Fairfield and Botany basins in the area of the Cumberland Plain.

This Canning Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Canning Basin, characterized by mostly Paleozoic sedimentary rocks with a maximum thickness of over 15,000 m, went through four major depositional phases from Early Ordovician to Early Cretaceous. The basin contains two main depocenters, the Fitzroy Trough-Gregory Sub-basin in the north and the Willara Sub-basin-Kidson Sub-basin in the south. The depositional history includes marine, evaporite, fluvial, deltaic, glacial, and non-marine environments. The basin's evolution began with extension and rapid subsidence in the Early Ordovician, followed by a sag stage with evaporite and playa conditions in the Late Ordovician and Silurian. The Devonian to Early Carboniferous phase involved marine, reef, fluvio-deltaic, and terrestrial sedimentation in the north and marginal marine to terrestrial systems in the south. The Late Carboniferous to mid-Triassic period saw non-marine and marine settings, including glacial environments. The basin then experienced mid-Jurassic to Early Cretaceous deposition, mainly in deltaic and non-marine environments. Throughout its history, the Canning Basin encountered multiple tectonic phases, including extension, compression, inversion, and wrench movements, leading to various depositional settings and sediment types. Around 250 petroleum wells have been drilled in the basin, with production mainly from Permo-Carboniferous sandstones and Devonian carbonates. Several proven and untested plays, such as draped bioherms, anticlinal closures, and fault blocks, provide potential for hydrocarbon exploration. Late Carboniferous and Jurassic mafic sills intersected in wells indicate additional geological complexity. Additionally, some areas of the Canning Basin are considered suitable for CO2 storage.

<div>This presentation is about the National Hydrogeological Inventory, developed as part of Geoscience Australia's national-scale groundwater research efforts in the Exploring for the Future (EFTF) program. The presentation is part of the 2024 Distinguished Geoscience Australia Lecture (DGAL) series.</div><div><br></div><div>One of Geoscience Australia's strategic drivers is to Improve understanding of Australia's groundwater systems to support sustainable management and help to secure our water resources to optimise and sustain their use. Aligned with this key objective, and as part of the EFTF program, Geoscience Australia developed and delivered the first comprehensive update to the Hydrogeology of Australia map and supporting report since first published more than 35 years ago.</div><div>&nbsp;</div><div>Known as the National Hydrogeological Inventory (NHI), this new online mapping application delivers consistent national-scale synthesis of hydrogeological and related data and information for the nation's 42 major groundwater provinces. Accessible via the Geoscience Australia Data Discovery Portal, the NHI provides an enhanced and updated picture of groundwater systems across Australia, giving us a broader understanding of the communities, industries, and environments that rely on access to groundwater. This presentation uncovers the story behind the development of the inventory, looking at why it was developed, the type of information it contains, and plans for further improvements as part of the new Resourcing Australia's Prosperity Initiative.</div><div> </div>

This Laura Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Laura Basin contains sedimentary rocks deposited between 168 and 102 million years ago during the Middle Jurassic to Early Cretaceous. The basin extends offshore beneath the Great Barrier Reef, and forms a bowl-shaped geologic feature. The strata have a maximum thickness of about 1,000 m in the north-central part of the onshore basin. Three main stratigraphic units comprise the stratigraphic succession of the Laura Basin, these being the Rolling Downs Group (Late Aptian to Albian, Cretaceous), the Gilbert River Formation (Lower Cretaceous to Jurassic) and the Dalrymple Sandstone (Upper to Middle Jurassic). The Rolling Downs Group was deposited in a shallow marine environment and has a basal shale unit (the Wallumbilla Formation) with minor siltstone and conglomerate bands overlain by marine silty and sandy claystone. The Gilbert River Formation was deposited in lagoonal to marginal marine environments and is dominated by clay-rich sandstone that is locally glauconitic and interbedded with minor calcareous siltstone, claystone and conglomerate. The Dalrymple Sandstone was deposited in lagoonal and fluvial environments and is dominated by sandstone with lesser claystone, siltstone, conglomerate, tuff and coal. The Laura Basin overlies older rocks of the Permian to Triassic Lakefield Basin, which extends northwards into surrounding marine waters, the Paleozoic metasedimentary rocks of the Hodgkinson region, associated with the Mossman Orogen, and Proterozoic basement rocks.

This Central Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Mesoproterozoic Musgrave Province is a significant geological feature in Central Australia, covering around 130,000 square kilometres across the tri-border region of Northern Territory, South Australia, and eastern Western Australia. It is characterized by east-west trending, metamorphosed igneous rocks, including granites, intrusions, and volcanics. The province experienced various deformation events, including the Mount West Orogeny and Musgravian Orogeny, resulting in the emplacement of granites and high-grade metamorphism. The Ngaanyatjarra Rift (1090 to 1040 Ma) is a failed intracontinental rift that formed due to magmatism-induced extension. The associated Giles Event was characterised by mafic to ultra-mafic intrusions (Giles Suite), bimodal volcanism and rift sedimentation (Bentley Supergroup), granitic intrusions and dyke emplacement. The Giles Event was followed by the emplacement of dolerite dykes including the Kullal Dyke Suite and the Amata Dolerite, approximately 1000 Ma and 825 Ma. The Peterman Orogeny played a crucial role in shaping the geological architecture of the Musgrave Province, forming the distinctive east-to-west-directed ranges.

<div>Geoscience Australia's Exploring for the Future Program (EFTF) is supporting regional and national-scale initiatives to address Australia’s hydrogeological challenges using an integrated geoscience systems approach. An important early step in the EFTF groundwater program focused on developing a national hydrogeological inventory of Australia’s major groundwater basins and fractured rock provinces. The inventory has its roots in the seminal 1987 Hydrogeology of Australia map, the first continental-scale map of groundwater systems and principal aquifers (Jacobson and Lau, 1987). Seeking to enhance and modernise the supporting information base for the national map, the inventory combines a curated selection of geospatial data attributes supported by focused narrative on the geology and hydrogeology of each basin and fractured rock province.</div><div>&nbsp;</div><div>The national hydrogeological inventory has a broad range of benefits for Australian groundwater users, managers and policy makers. These include the provision of an updated knowledge base covering the hydrogeology and groundwater systems of the major hydrogeological provinces of the nation, as well as important contextual information. The extensive catalogue of knowledge contained in the inventory also enables an objective approach to identify and prioritise areas for further regional assessment.</div><div>&nbsp;</div><div>Based on analysis of data compiled for the national inventory, the Lake Eyre Basin in arid central Australia was the first region prioritised for more detailed hydrogeological assessment during EFTF. The integration of a variety of basin- to national-scale geoscience datasets enabled significant advances in geological and hydrogeological understanding and the development of a new geological model for the three main basin depo-centres, namely the Tirari and Callabonna Sub-basins, and the Cooper Creek Palaeovalley. The geological modelling has further supported a range of hydrogeological applications, including substantial improvements in the number of bores with aquifer attribution, as well as the first regional watertable map across the basin. Abstract submitted and presented at the 2023 AGC NZHS Joint Conference Auckland, NZ (https://www.agcnzhs2023conference.co.nz/)