Earthquake Environmental Effects (EEEs) identified in the source region of the 20th May 2016 intraplate moment magnitude (Mw) 6.1 Petermann earthquake in Central Australia are described and classified using the Environmental Seismic Intensity (ESI-07) scale. EEEs include surface rupture, ground fissures and cracks, vegetation damage, rockfalls, and displaced (jumped) bedrock fragments. The maximum ESI intensity derived from EEEs is X, consistent with previous observations from some moderate Mw crustal earthquakes. Maximum ESI isoseismals correlate with the location of the surface rupture rather than epicentre area due to the dipping geometry of the reverse source fault. ESI isoseismals encompass a larger area of the hanging-wall than the footwall, indicating stronger ground motions on the hanging-wall due to increased proximity to the rupture source and ground motion amplification effects. The maximum areal extent of secondary (seismic shaking-induced) EEEs (300 km2) is significantly smaller than expected using the published ESI-07 scale (approx. 5000 km2). This relates to the low topographic relief and relatively homogeneous bedrock geology of the study region, which (i) reduced the potential for site response amplification of strong ground motions, and (ii) reduced the susceptibility of the landscape to EEE such as landsliding and liquefaction. Erosional degradation of the observed EEE features and decreasing confidence with which they can be uniquely attributed to a seismic origin with increasing time since the earthquake highlight challenges in using many of the natural features observed herein to characterise the locations and attributes of paleo-earthquakes.

We digitize surface rupture maps and compile observational data from 67 publications on ten of eleven historical, surface-rupturing earthquakes in Australia in order to analyze the prevailing characteristics of surface ruptures and other environmental effects in this crystalline basement-dominated intraplate environment. The studied earthquakes occurred between 1968 and 2018, and range in moment magnitude (Mw) from 4.7 to 6.6. All earthquakes involved co-seismic reverse faulting (with varying amounts of strike-slip) on single or multiple (1–6) discrete faults of ≥ 1 km length that are distinguished by orientation and kinematic criteria. Nine of ten earthquakes have surface-rupturing fault orientations that align with prevailing linear anomalies in geophysical (gravity and magnetic) data and bedrock structure (foliations and/or quartz veins and/or intrusive boundaries and/or pre-existing faults), indicating strong control of inherited crustal structure on contemporary faulting. Rupture kinematics are consistent with horizontal shortening driven by regional trajectories of horizontal compressive stress. The lack of precision in seismological data prohibits the assessment of whether surface ruptures project to hypocentral locations via contiguous, planar principal slip zones or whether rupture segmentation occurs between seismogenic depths and the surface. Rupture centroids of 1–4 km in depth indicate predominantly shallow seismic moment release. No studied earthquakes have unambiguous geological evidence for preceding surface-rupturing earthquakes on the same faults and five earthquakes contain evidence of absence of preceding ruptures since the late Pleistocene, collectively highlighting the challenge of using mapped active faults to predict future seismic hazards. Estimated maximum fault slip rates are 0.2–9.1 m Myr−1 with at least one order of uncertainty. New estimates for rupture length, fault dip, and coseismic net slip can be used to improve future iterations of earthquake magnitude—source size—displacement scaling equations. Observed environmental effects include primary surface rupture, secondary fracture/cracks, fissures, rock falls, ground-water anomalies, vegetation damage, sand-blows/liquefaction, displaced rock fragments, and holes from collapsible soil failure, at maximum estimated epicentral distances ranging from 0 to ~250 km. ESI-07 intensity-scale estimates range by ± 3 classes in each earthquake, depending on the effect considered. Comparing Mw-ESI relationships across geologically diverse environments is a fruitful avenue for future research.

Coseismically displaced rock fragments (chips) in the near-field (less than 5 km) of the 2016 moment magnitude (MW) 6.1 Petermann earthquake (Australia) preserve directionality of strong ground motions. Displacement data from 1437 chips collected over an area of 100 km2 along and across the Petermann surface rupture is interpreted to record combinations of co-seismic directed permanent ground displacements associated with elastic rebound (fling) and transient ground shaking, with intensities of motion increasing with proximity to the surface rupture. The observations provide a proxy test for available models for directionality of near-field reverse fault strong ground motions in the absence of instrumental data. This study provides a dense proxy record of strong ground motions at less than 5 km distance from a surface rupturing reverse earthquake, and may help test models of near-field dynamic and static pulse-like strong ground motion for dip-slip earthquakes.

The 20 May 2016 surface-rupturing intraplate earthquake in the Petermann Ranges is the largest onshore earthquake to occur in the Australian continent in 19 yr. We use in situ and Interferometric Synthetic Aperture Radar surface observations, aftershock distribution, and the fitting of P-wave source spectra to determine source properties of the Petermann earthquake. Surface observations reveal a 21-km-long surface rupture trace (strike = 294°±29°) with heterogeneous vertical displacements ( <0:1–0:96 m). Aftershock arrays suggest a triangular-shaped rupture plane (dip ≈ 30°) that intersects the subsurface projection of the major geophysical structure (Woodroffe thrust [WT]) proximal to the preferred location of the mainshock hypocenter, suggesting the mainshock nucleated at a fault junction. Footwall seismicity includes apparent southwest-dipping Riedel-type alignments, including possible activation of the deep segment of the WT. We estimate a moment magnitude (Mw) of 6.0 and a corner frequency (fc) of 0.2 Hz, respectively, from spectral fitting of source spectra in the 0.02–2 Hz frequency band. These translate into a fault area of 124 km2 and an average slip of 0.36 m. The estimated stress drop of 2.2 MPa is low for an intraplate earthquake; we attribute this to low-frictional slip (effective coefficient of friction >0:015) along rupture-parallel phyllosilicate-rich surfaces within the host rock fabric with possible additional contributions from elevated pore-fluid pressures.

High‐resolution optical satellite imagery is used to quantify vertical surface deformation associated with the intraplate 20 May 2016 Mw 6.0 Petermann Ranges earthquake, Northern Territory, Australia. The 21 ± 1‐km‐long NW trending rupture resulted from reverse motion on a northeast dipping fault. Vertical surface offsets of up to 0.7 ± 0.1m distributed across a 0.5‐to‐1‐km‐wide deformation zone are measured using the Iterative Closest Point algorithm to compare preearthquake and postearthquake digital elevation models derived from WorldView imagery. The results are validated by comparison with field‐based observations and interferometric synthetic aperture radar. The pattern of surface uplift is consistent with distributed shear above the propagating tip of a reverse fault, leading to both an emergent fault and folding proximal to the rupture. This study demonstrates the potential for quantifying modest (<1 m) vertical deformation on a reverse fault using optical satellite imagery.

The 20th May 2016 moment magnitude (MW) 6.1 Petermann earthquake was the 2nd longest single-event historic Australian surface rupture (21 km) and largest MW on-shore earthquake in 28 years. Trench logs from two hand-dug trenches show no evidence of penultimate rupture of surface eolian sediments or underlying calcrete. Available dating of eolian dunes 140 to 500 km away from the Petermann fault indicated eolian deposition during either the last glacial maximum (approximately 20 ka) or a period of aridification at approximately 180 - 200 ka. Ten 10Be cosmogenic nuclide erosion rates of bedrock outcrops at 0 to 50 km from the surface rupture trace are within error of each other between 1.4 to 2.6 mMyr-1. These samples have approximate averaging times between 208 to 419 ka. Bedrock erosion rates, trenching results and interpretation of the landscape history suggest the 2016 event is the only surface rupturing earthquake on the Petermann fault in the last 200 to 400 kyrs, and possibly the first ever on this fault. This finding is consistent with a lack of evidence for penultimate rupture for all eleven historic Australian surface rupturing events, as described by either trenching and/or landscape analysis and bedrock erosion rates. These ‘one-off’ events within Precambrian cratonic Australian crust are not consistent with trenching results and geomorphology of paleo-scarps within the Flinders Ranges and Eastern Australia which indicate multiple recurrent fault offset. Variable fault recurrence behaviour highlights that uniform seismic hazard modelling approaches are not applicable across Stable Continental Regions.