Authors / CoAuthors
Brodie, R.C.
Abstract
The product consists of 5,291 line kilometres of time-domain airborne electromagnetic (AEM) geophysical data acquired in the Fitzroy River Catchment of the West Kimberley region, the electrical conductivity models derived from the dataset, and the survey operations and processing report. The data were acquired using the heliborne SkyTEM-312 AEM system. A locality diagram for the survey is shown below. The survey was funded by the Government of Western Australia, as part of its Water for Food Initiative, through the Department of Water (WA DoW). The survey was managed by Geoscience Australia as part of a national collaborative framework project agreement with WA DoW. The aim of the survey was to map the electrical properties of the top 200-300 metres of the sub-surface geology and hydrogeology within the study area. Geoscience Australia contracted SkyTEM Australia Pty Ltd to acquire the AEM data using the SkyTEM-312 system in September and October 2015. The data were also processed by SkyTEM Australia Pty Ltd using its in-house processing and inversion techniques. The Kimberley Region in north-west Australia is a priority area for the development of irrigated agriculture. The hydrogeology of the area is poorly understood, hence the primary aim of the AEM survey was to provide geophysical data in support of groundwater investigations. Specific objectives of the AEM survey included mapping the extent of regional Canning Basin aquifers to aid assessment of groundwater resources and sustainable yield estimates for agricultural development; provide AEM data in transects to underpin studies of surface-groundwater interactions (groundwater discharge and recharge potential) associated with the major rivers, and permanent river pools in particular; detect and assess potential groundwater salinity hazards within proposed irrigation areas; and map the seawater intrusion (SWI) interface. Very specific mapping objectives were developed for each sub-area, and the survey was designed with these detailed local objectives in mind. The survey design reflects two scales of investigation: 1. Two areas (Knowsley-Mowanjum and GoGo-Fitzroy Crossing) with higher density flight line spacing (400 m) in areas with advanced plans for development of irrigated agriculture; 2. Irregular grid of regional transects and lines acquired along river tracts reflecting the reconnaissance nature of regional investigations in a frontier hydrogeological area. Much of the area lies underneath cover of sedimentary basins and is a poorly-understood element of Australia¿s geology. The Fitzroy Trough is also host to a number of mineral systems including diamonds and base metal mineralisation, as well as shale gas resources. The survey data should assist with understanding of the basin geology and neotectonics, while lamproite pipes have also been intersected in a number of flight lines. The survey data will also add to the knowledge of the thickness and character of alluvium and regolith cover and will inform future geological mapping in the region. The data will be available from Geoscience Australia¿s web site free of charge. The data release package includes: 1. Point-located electromagnetic line data with associated position, height, orientation, transmitter current, and derived ground elevation data. These data are in ASCII column format with associated ASEG-GDF2 header files. All regular survey, repeat lines and high altitude lines are included in the dataset. The dataset is split into Parts 1 and 2 based on the differences in the receiver gate times for each part. 2. Point-located magnetic line data with associated position, height, orientation, and derived ground elevation data. These data are in ASCII column format with associated ASEG-GDF2 header files. All regular survey, repeat lines and high altitude lines are included in the dataset. 3. Point-located line data for conductivity estimates derived by SkyTEM Australia Pty Ltd using its Automated Laterally Constrained Inversion (aLCI) algorithm with associated position, height, orientation, and derived ground elevation data. Data include the conductivity estimate for each of the 30 inversion model layers, the layer elevation, estimated depth of investigation, and data fit residuals. These data are in ASCII column format with associated ASEG-GDF2 header files. All regular survey and repeat lines are included in the dataset. 4. Gridded data for the derived ground elevations, total magnetic intensity, and the conductivity of the 30 aLCI inversion model layers. The grids are in ER Mapper® binary raster grid format with associated header files. The grids have a cell size of 100 m. For the aLCI inversion layer conductivity grids, there are versions that are masked (set to undefined) below the estimated depth of investigation and unmasked. 5. Graphical multiplots and spatial images derived from the aLCI inversion. The multiplots show the derived aLCI conductivity depth sections and selected data panels for each individual flight line in Portable Network Graphics (PNG) and Portable Document Format (PDF) formats. The spatial images show colour images of the conductivity for each aLCI model layer and are in PNG, PDF and geo-located Tagged Image Format (TIF) files suitable for use in MAPINFO. 6. The survey Operations and Processing Report, which provides the details of the AEM system, logistics, data acquisition, data processing and the aLCI inversion parameters. 7. ESRI shapefiles and KML files of flight lines. Summary Survey Name West Kimberley Airborne EM Survey, WA, 2015 (Water for Food) State Western Australia Sub Region West Kimberley Area 20,314 km2 Line km 5,291 km Survey Completed 17 October 2015 AEM system SkyTEM-312 Processing SkyTEM Australia Pty Ltd
Product Type
dataset
eCat Id
102860
Contact for the resource
Point of contact
- Contact instructions
- MEG
Point of contact
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Keywords
- ( Discipline )
-
- geophysics
- ( Place )
-
- Western Australia
- Australian and New Zealand Standard Research Classification: Fields of Research
-
- Earth Sciences
-
- Published_External
- ( Place )
-
- West Kimberley
- ( Discipline )
-
- electrical conductivity
- ( Instrument )
-
- SkyTEM
- ( Instrument )
-
- AEM
- ( Instrument )
-
- airborne electromagnetics
Publication Date
2016-11-18T12:00:00 2016-11-17T00:00:00
Creation Date
Security Constraints
Legal Constraints
Status
Purpose
Maintenance Information
asNeeded
Topic Category
geoscientificInformation
Series Information
Lineage
Final processed AEM data and electrical conductivity models supplied by the survey contractor Skytem Australia, Pty. Ltd.
Parent Information
Extents
[-18.7, -16.8, 123.5, 125.9]
Reference System
GDA94 (EPSG:4283)
Spatial Resolution
Service Information
Associations
Downloads and Links
Source Information