<div>AusSeabed follows the recommended processing methodology as prescribed by the AusSeabed Multibeam Guidelines. Please note that certain products are subject to routine update (e.g. resolution, coverage, temporal variation, guidelines/best practice). The client is advised to refer to the latest version of all documents and products for the mostup-to-date material. For eCat records the version is expressed in the record title whilst products incorporate date of production as per AusSeabed’s file naming convention.</div><div>This surface is a 30 metre Shoal Depth True Position (SDTP) surface derived from International Hydrographic Organisation (IHO) Order 1A, 1 and 2 metre Combined Uncertainty and Bathymetry Estimator (CUBE) surfaces supplied to the Australian Hydrographic Office (AHO), with depth, position, density and uncertainty preserved from the original surface.</div><div>Full resolution surfaces available from AHO on request under restricted licence.</div><div><br></div><div>Survey metadata:</div><div>aho_id: 31888237</div><div>version: 1</div><div>name: SI 1007 Two-Way Route, Abbot Point to Hydrographers Passage, QLD</div><div>nb-of-points: 1110</div><div>north: -19.6386835</div><div>south: -20.8429562</div><div>east: 149.8256812</div><div>west: 148.133836</div><div>boundingbox-crs: EPSG:4326</div><div>start-date: 6-Oct-20</div><div>end-date: 16-Mar-21</div><div>survey area: Two-Way Route, Abbot Point to Hydrographers Passage, QLD</div><div>platform-class: Ship</div><div>vessel: RV Escape</div><div>surveyor: Geoff Lawes (CPHS1)</div><div>external-reference: SI 1007</div><div>classification: Official</div><div>abstract: This is a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Pt. through Hydrographers Psg., QLD</div><div>Lineage (Description): This surface is a 30 metre Shoal Depth True Position (SDTP) surface derived from International Hydrographic Organisation (IHO) Order 1A, 1 and 2 metre Combined Uncertainty and Bathymetry Estimator (CUBE) surfaces supplied to the Australian Hydrographic Office (AHO), with depth, position, density and uncertainty preserved from the original surface.&nbsp;Full resolution surfaces available from AHO on request under restricted licence.</div><div>data-owner: Australian Hydrographic Office, Commonwealth of Australia</div><div>custodian: Geoscience Australia, Commonwealth of Australia</div><div>point-of-contact: hydro.licensing@defence.gov.au</div><div>legal-constraints: Creative Commons CC BY 4.0</div><div>geodetic-datum: WGS84</div><div>projection: Latitude/Longitude (WGS 84)</div><div>vertical-datum: Mean Sea Level (MSL)</div><div>instrument-type: Multibeam Echosounder (MBES)</div><div>sensor-type: Kongsberg EM 2040</div><div>sensor-frequency: 300 kHz</div><div>horizontal-positioning-method: Multi-Channel Septentrio GNSS receiver input to ROVINS INS</div><div>vertical-reduction-method: Reduced to Lowest Astronomical Tide using an AHO-approved tidal model based on observed tides. Final adjustment to Mean Sea Level by AHO</div><div>accepted-soundings-accuracy (unit(m)): 0.7m at 60m</div><div>accepted-positional-accuracy (unit(m)): 2</div><div>accepted-survey-order: Order 1A</div><div>accepted-survey-order-url: hydro.licensing@defence.gov <div>AusSeabed follows the recommended processing methodology as prescribed by the AusSeabed Multibeam Guidelines. Please note that certain products are subject to routine update (e.g. resolution, coverage, temporal variation, guidelines/best practice). The client is advised to refer to the latest version of all documents and products for the mostup-to-date material. For eCat records the version is expressed in the record title whilst products incorporate date of production as per AusSeabed’s file naming convention.</div><div>This surface is a 30 metre Shoal Depth True Position (SDTP) surface derived from International Hydrographic Organisation (IHO) Order 1A, 1 and 2 metre Combined Uncertainty and Bathymetry Estimator (CUBE) surfaces supplied to the Australian Hydrographic Office (AHO), with depth, position, density and uncertainty preserved from the original surface.</div><div>Full resolution surfaces available from AHO on request under restricted licence.</div><div><br></div><div>Survey metadata:</div><div>aho_id: 31888237</div><div>version: 1</div><div>name: SI 1007 Two-Way Route, Abbot Point to Hydrographers Passage, QLD</div><div>nb-of-points: 1110</div><div>north: -19.6386835</div><div>south: -20.8429562</div><div>east: 149.8256812</div><div>west: 148.133836</div><div>boundingbox-crs: EPSG:4326</div><div>start-date: 6-Oct-20</div><div>end-date: 16-Mar-21</div><div>survey area: Two-Way Route, Abbot Point to Hydrographers Passage, QLD</div><div>platform-class: Ship</div><div>vessel: RV Escape</div><div>surveyor: Geoff Lawes (CPHS1)</div><div>external-reference: SI 1007</div><div>classification: Official</div><div>abstract: This is a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Pt. through Hydrographers Psg., QLD</div><div>Lineage (Description): This surface is a 30 metre Shoal Depth True Position (SDTP) surface derived from International Hydrographic Organisation (IHO) Order 1A, 1 and 2 metre Combined Uncertainty and Bathymetry Estimator (CUBE) surfaces supplied to the Australian Hydrographic Office (AHO), with depth, position, density and uncertainty preserved from the original surface.&nbsp;Full resolution surfaces available from AHO on request under restricted licence.</div><div>data-owner: Australian Hydrographic Office, Commonwealth of Australia</div><div>custodian: Geoscience Australia, Commonwealth of Australia</div><div>point-of-contact: hydro.licensing@defence.gov.au</div><div>legal-constraints: Creative Commons CC BY 4.0</div><div>geodetic-datum: WGS84</div><div>projection: Latitude/Longitude (WGS 84)</div><div>vertical-datum: Mean Sea Level (MSL)</div><div>instrument-type: Multibeam Echosounder (MBES)</div><div>sensor-type: Kongsberg EM 2040</div><div>sensor-frequency: 300 kHz</div><div>horizontal-positioning-method: Multi-Channel Septentrio GNSS receiver input to ROVINS INS</div><div>vertical-reduction-method: Reduced to Lowest Astronomical Tide using an AHO-approved tidal model based on observed tides. Final adjustment to Mean Sea Level by AHO</div><div>accepted-soundings-accuracy (unit(m)): 0.7m at 60m</div><div>accepted-positional-accuracy (unit(m)): 2</div><div>accepted-survey-order: Order 1A</div><div>accepted-survey-order-url: https://iho.int › pubs › S-44_Edition_6.0.0_EN.pdf</div><div>usage-limitation: Not to be used for Navigation</div><div>contact-address: 8 Station St, Wollongong, NSW, Australia 2500</div><div>GCMD-keyword: EARTH SCIENCE>OCEANS>BATHYMETRY/SEAFLOOR TOPOGRAPHY</div><div>GA-keyword: AusSeabed, Bathymetry, Marine, Bathymetry Grids</div><div>name of survey contractor: iXblue Pty Ltd</div><div>statement_of_requirements: HIPP SOR 2020 v1.2</div><div>year of installation: 2020</div><div>number of sensor heads: 1</div><div>number of soundings: 1024 Per ping</div><div>beamwidth along track (degree): 0.5</div><div>beamwidth across track (degree): 1</div><div>pulse length (μs): 25</div><div>absorption (dB/km): N/A</div><div>selectable depth range (m): N/A</div><div>vessel speed (kt): 6.5</div><div>start port: Cairns, QLD</div><div>end port: Cairns, QLD</div><div>sensor operating mode: Ultra High Density Equidistant</div><div>sensor swath (degrees): 140</div><div>grid sounding density: 95% of nodes >5 soundings per node at survey resolution</div><div>processing software: QPS QINSy 9.2.3</div><div>processing methodology: Processed in accordance with HIPP SOR 2020 v1.2 using CUBE techniques, 1 and 2m CUBE surfaces generated as the final L3 dataset</div><div>grid resolution (m): 30</div><div>number of grids: 1</div><div><br></div><div><br></div><div>Processing methodology:</div><div>This dataset was produced using CARIS HIPS & SIPS as follow:</div><div>1. Processed in accordance with HIPP SOR 2020v 1.2 using CUBE techniques, 1m and 2m CUBE surfaces generated as the final L3 product (a gridded surface derived from cleaned point data).</div><div>2. Data was provided to Geoscience Australia for publication.</div><div>3. The final processed grid was exported as a 32-bit floating point Geotiff at 30 m resolution, referenced to MSL, WGS 84 (EPSG:4326).</div><div><br></div><div>DATA QUALITY</div><div><br></div><div>This dataset has been subject to independent post-production validation and testing. Tests have been performed for data completeness, correct spatial representation, attribute accuracy, logical consistency, metadata completeness and correctness, and where appropriate for compliance with Geoscience Australia's data dictionaries.</div><div>Errors found in this dataset should be reported to:</div><div>Corporate Data Manager</div><div>Geoscience Australia</div><div>GPO Box 378</div><div>Canberra ACT 2601, Australia</div><div>Email: Sales@ga.gov.au</div><div>Reported Errors will be rectified in subsequent data releases, if any.</div><div><br></div> Sales@ga.gov › pubs › S-44_Edition_6.0.0_EN.pdf</div><div>usage-limitation: Not to be used for Navigation</div><div>contact-address: 8 Station St, Wollongong, NSW, Australia 2500</div><div>GCMD-keyword: EARTH SCIENCE>OCEANS>BATHYMETRY/SEAFLOOR TOPOGRAPHY</div><div>GA-keyword: AusSeabed, Bathymetry, Marine, Bathymetry Grids</div><div>name of survey contractor: iXblue Pty Ltd</div><div>statement_of_requirements: HIPP SOR 2020 v1.2</div><div>year of installation: 2020</div><div>number of sensor heads: 1</div><div>number of soundings: 1024 Per ping</div><div>beamwidth along track (degree): 0.5</div><div>beamwidth across track (degree): 1</div><div>pulse length (μs): 25</div><div>absorption (dB/km): N/A</div><div>selectable depth range (m): N/A</div><div>vessel speed (kt): 6.5</div><div>start port: Cairns, QLD</div><div>end port: Cairns, QLD</div><div>sensor operating mode: Ultra High Density Equidistant</div><div>sensor swath (degrees): 140</div><div>grid sounding density: 95% of nodes >5 soundings per node at survey resolution</div><div>processing software: QPS QINSy 9.2.3</div><div>processing methodology: Processed in accordance with HIPP SOR 2020 v1.2 using CUBE techniques, 1 and 2m CUBE surfaces generated as the final L3 dataset</div><div>grid resolution (m): 30</div><div>number of grids: 1</div><div><br></div><div><br></div><div>Processing methodology:</div><div>This dataset was produced using CARIS HIPS & SIPS as follow:</div><div>1. Processed in accordance with HIPP SOR 2020v 1.2 using CUBE techniques, 1m and 2m CUBE surfaces generated as the final L3 product (a gridded surface derived from cleaned point data).</div><div>2. Data was provided to Geoscience Australia for publication.</div><div>3. The final processed grid was exported as a 32-bit floating point Geotiff at 30 m resolution, referenced to MSL, WGS 84 (EPSG:4326).</div><div><br></div><div>DATA QUALITY</div><div><br></div><div>This dataset has been subject to independent post-production validation and testing. Tests have been performed for data completeness, correct spatial representation, attribute accuracy, logical consistency, metadata completeness and correctness, and where appropriate for compliance with Geoscience Australia's data dictionaries.</div><div>Errors found in this dataset should be reported to:</div><div>Corporate Data Manager</div><div>Geoscience Australia</div><div>GPO Box 378</div><div>Canberra ACT 2601, Australia</div><div>Email: Sales@ga.gov.au</div><div>Reported Errors will be rectified in subsequent data releases, if any.</div><div><br></div>