This dataset is a key input to the development of the Australian National Seismic Hazard Assessment for 2018 (NSHA18).

This data is the output from the model assessment for the 2018 National Seismic Hazard Assessment for Australia (NSHA18) product (refer eCat 123020 for overview of product). This data is provided in multiple formats and is supported by accompanying maps to illustrate the seismic hazard (refer description of the model output at eCat 123028). The data is the output from the modelling process described in eCat 123049 which is in turn informed by GA Records relating to the expert elicitation workshop (eCat 123027), ground motion model selection (ecat 123034), earthquake epicentre catalogue (eCat 123041) and earthquake sources (eCat 123048).

<div>This Geoscience Australia Record contains technical data and input files that, when used with the Global Earthquake Model’s (GEM’s) <em>OpenQuake-engine</em> probabilistic seismic hazard analysis software (Pagani<em> et al.</em>, 2023), will enable end users to explore and reproduce the 2023 National Seismic Hazard Assessment (NSHA23) of Australia (Allen<em> et al.</em>, 2023b). Output data, as calculated by Geoscience Australia using Version 3.16.1 of the <em>OpenQuake-engine</em>, are also provided. This report describes the NSHA23 input and output data only and does not discuss the scientific rationale behind the model development or the development of the NSHA23 earthquake catalogue. These details are provided in Allen<em> et al.</em> (2023b) and (Allen<em> et al.</em>, 2024), and respective references therein. The NSHA23 provides estimates of seismic hazard for the six Australian states and two mainland territories. However, it does not provide updated hazard factors for Australia’s Antarctic and other offshore territories (e.g., Christmas Island, Cocos Island, Heard Island, Lord Howe Island, Macquarie Island and Norfolk Island).</div>

One of the key challenges in assessing earthquake hazard in Australia is understanding the attenuation of ground-motion through the stable continental crust. There are now a handful of ground-motion models (GMMs) that have been developed specifically to estimate ground-motions from Australian earthquakes. These GMMs, in addition to models developed outside Australia, are considered in the 2018 National Seismic Hazard Assessment (NSHA18; Allen et al., 2017). In order to assess the suitability of candidate GMMs for use in the Australian context, ground-motion data forom small-to-moderate Australian earthquakes have been gathered. Both qualitative and quantitative ranking techniques (e.g., Scherbaum et al., 2009) have been applied to determine the suitability of candidate GMMs for use in the NSHA18. This report provides a summary of these ranking techniques and provides a discussion on the utility of these methods for use in seismic hazard assessments in Australia; in particular for the NSHA18. The information supplied herein was provided to participants of the Ground-Motion Characterisation Expert Elicitation workshop, held at Geoscience Australia on 9 March 2017 (Griffin et al., 2018).

Data used to generate the National Seismic Hazard Assessments (NSHA). Data includes: original and modified earthquake catalogues, earthquake rate models, probabilistic seismic hazard outputs. The most recent assessment was completed in 2018 and can be viewed on Geoscience Australia's <a href="http://www.ga.gov.au/about/projects/safety/nsha">National Seismic Hazard Assessment (NSHA) Internet Page</a> <b>Value: </b> Data used to generate the NSHA <b>Scope: </b>Continental scale

This Geoscience Australia Record contains technical data and input files that, when used with the Global Earthquake Model’s (GEM’s) OpenQuake-engine probabilistic seismic hazard analysis software (Pagani et al., 2014), will enable end users to explore and reproduce the 2018 National Seismic Hazard Assessment (NSHA18) of Australia (Allen et al., 2018a). This report describes the NSHA18 input data only and does not discuss the scientific rationale behind the model development. These details are provided in Allen et al. (2018a) and references therein.

The 2018 National Seismic Hazard Assessment (NSHA18) aims to provide the most up-to-date and comprehensive understanding of seismic hazard in Australia. As such, NSHA18 includes a range of alternative models for characterising seismic sources and ground motions proposed by members of the Australia earthquake hazard community. The final hazard assessment is a weighted combination of alternative models. This report describes the use of a structured expert elicitation methodology (the ‘Classical Model’) to weight the alternative models and presents the complete results of this process. Seismic hazard assessments are inherently uncertain due to the long return periods of damaging earthquakes relative to the time period of human observation. This is especially the case for low-seismicity regions such as Australia. Despite this uncertainty, there is a demand for estimates of seismic hazard to underpin a range of decision making aimed at reducing the impacts of earthquakes to society. In the face of uncertainty, experts will propose alternative models for the distribution of earthquake occurrence in space, time and magnitude (i.e. seismic source characterisation), and how ground shaking is propagated through the crust (i.e. ground motion characterisation). In most cases, there is insufficient data to independently and quantitatively determine a ‘best’ model. Therefore it is unreasonable to expect, or force, experts to agree on a single consensus model. Instead, seismic hazard assessments should capture the variability in expert opinion, while allowing that not all experts are equally adept. Logic trees, with branches representing mutually exclusive models weighted by expert opinion, can be used to model this uncertainty in seismic hazard assessment. The resulting hazard assessment thereby captures the range of plausible uncertainty given current knowledge of earthquake occurrence in Australia. For the NSHA18, experts were invited to contribute peer-reviewed seismic source models for consideration, resulting in 16 seismic source models being proposed. Each of these models requires values to be assigned to uncertain parameters such as the maximum magnitude earthquake expected. Similarly, up to 20 published ground motion models were identified as being appropriate for characterising ground motions for different tectonic regions in Australia. To weight these models, 17 experts in seismic hazard assessment, representative of the collective expertise of the Australian earthquake hazard community, were invited to two workshops held at Geoscience Australia in March 2017. At these workshops, the experts each assigned weights to alternative models representing their degree of belief that a particular model is the ‘true’ model. The experts were calibrated through a series of questions that tested their knowledge of the subject and ability to assess the limits to their knowledge. These workshops resulted in calibrated weights used to parameterise the final seismic source model and ground motion model logic trees for NSHA18. Through use of a structured expert elicitation methodology these weights have been determined in a transparent and reproducible manner drawing on the full depth of expertise and experience within the Australia earthquake hazard community. Such methodologies have application to a range of uncertain problems beyond the case of seismic hazard assessment presented here.

Located within an intraplate setting, continental Australia has a relatively low rate of seismicity compared with its surrounding plate boundary regions. However, the plate boundaries to the north and east of Australia host significant earthquakes that can impact Australia. Large plate boundary earthquakes have historically generated damaging ground shaking in northern Australia, including Darwin. Large submarine earthquakes have historically generated tsunami impacting the coastline of Australia. Previous studies of tsunami hazard in Australia have focussed on the threat from major subduction zones such as the Sunda and Kermadec Arcs. Although still subject to uncertainty, our understanding of the location, geometry and convergence rates of these subduction zones is established by global tectonic models. Conversely, actively deforming regions in central and eastern Indonesia, the Papua New Guinea region and the Macquarie Ridge region are less well defined, with deformation being more continuous and less easily partitioned onto discrete known structures. A number of recently published geological, geodetic and seismological studies are providing new insights into present-day active tectonics of these regions, providing a basis for updating earthquake source models for earthquake and tsunami hazard assessment. This report details updates to earthquake source models in active tectonic regions along the Australian plate boundary, with a primary focus on regions to the north of Australia, and a subsidiary focus on the Puyesgur-Macquarie Ridge-Hjort plate boundary south of New Zealand. The motivation for updating these source models is threefold: 1. To update regional source models for the 2018 revision of the Australian probabilistic tsunami hazard assessment (PTHA18); 2. To update regional source models for the 2018 revision of the Australian national seismic hazard assessment (NSHA18); and 3. To provide an updated database of earthquake source models for tsunami hazard assessment in central and eastern Indonesia, in support of work funded through the Department of Foreign Affairs and Trade (DFAT) DMInnovation program.

This ecat record refers to the data described in ecat record 123048. The data, supplied in shapefile format, is an input to the 2018 National Seismic Hazard Assessment for Australia (NSHA18) product (ecat 123020) and the 2018 Probabilistic Tsunami Hazard Assessment for Australia (PTHA18) product (ecat 122789).

Geoscience Australia, together with contributors from the wider Australian seismology community, has produced a National Seismic Hazard Assessment (NSHA18) that is intended as an update to the 2012 National Seismic Hazard Maps (NSHM12; Burbidge, 2012; Leonard et al., 2013). This Geoscience Australia Record provides an overview of the development of the NSHA18. Time-independent, mean seismic design values are calculated on Standards Australia’s AS1170.4 Soil Class Be (at VS30=760 m/s) for the horizontal peak ground acceleration (PGA) and for the geometric mean of the spectral accelerations, Sa(T), for T = 0.1, 0.2, 0.3, 0.5, 1.0, 2.0 and 4.0 s over a 15-km national grid spacing. Hazard curves and uniform hazard spectra are also calculated for key localities. Maps of PGA, in addition to Sa(0.2 s) and Sa(1.0 s) and for a 10% probability of exceedance in 50 years (Figure A). Additional maps and seismic hazard products are provided in a separate Geoscience Australia Record (Allen, 2018). The NSHA18 update yields many important advances over its predecessors, including: - the calculation in a full probabilistic framework (Cornell, 1968) using the Global Earthquake Model Foundation’s OpenQuake-engine (Pagani et al., 2014); - the consistent expression of earthquake magnitudes in terms of moment magnitude, MW; - inclusion of a national fault-source model based on the Australian Neotectonic Features database (Clark et al., 2016); - the inclusion of epistemic (i.e. modelling) uncertainty: - through the use of multiple alternative source models; - on magnitude-recurrence distributions; - fault recurrence and clustering models; - on maximum earthquake magnitudes for both fault and area sources through an expert elicitation workshop; and - the use of modern ground-motion models, capturing the epistemic uncertainty on ground motion through an expert elicitation workshop.