Granulite-facies paragneisses enriched in boron and phosphorus are exposed over a ca. 15 x 5 km area in the Larsemann Hills, East Antarctica. The most widespread are biotite gneisses containing centimeter-sized prismatine crystals, but tourmaline metaquartzite and borosilicate gneisses are richest in B (680-20 000 ppm). Chondrite-normalized REE patterns give two groups: (1) LaN>150, Eu*/Eu < 0.4, which comprises most apatite-bearing metaquartzite and metapelite, tourmaline metaquartzite, and Fe-rich rocks (0.9-2.3 wt% P2O5), and (2) LaN<150, Eu*/Eu > 0.4, which comprises most borosilicate and sodic leucogneisses (2.5-7.4 wt% Na2O). The B- and P-bearing rocks can be interpreted to be clastic sediments altered prior to metamorphism by hydrothermal fluids that remobilized B. We suggest that these rocks were deposited in a back-arc basin located inboard of a Rayner aged (ca. 1000 Ma) continental arc that was active along the leading edge the Indo-Antarctic craton. This margin and its associated back-arc basin developed long before collision with the Australo-Antarctic craton (ca. 530 Ma) merged these rocks into Gondwana and sutured them into their present position in Antarctica. The Larsemann Hills rocks are the third occurrence of such a suite of borosilicate or phosphate bearing rocks in Antarctica and Australia: similar rocks include prismatine-bearing granulites in the Windmill Islands, Wilkes Land, and tourmaline-quartz rocks, sodic gneisses and apatitic iron formation in the Willyama Supergroup, Broken Hill, Australia. These rocks were deposited in analogous tectonic environments, albeit during different supercontinent cycles.

Detailed field mapping between Cloncurry and Selwyn has established the existence of a common stratigraphic/tectonic history of almost all the geology east of the Overhang Shear Zone, a major suture separating the Cloncurry-Selwyn Zone from the Quamby-Malbon Belt and Mitakoodi Block. The major exception is a discrete tectonic belt in the far south of the region, the Gin Creek Block, which forms an anomalous zone of older stratigraphy and high grade metamorphism enveloped by tectonic boundaries with the surrounding units. The Cloncurry-Selwyn Zone itself could be subdivided into several sub-regions with similar internal characteristics, but for simplicity the key findings reveal that there are two principal supra-crustal packages folded and interleaved together along major faults and intruded by 1550-1510Ma granitic rocks.

The Beagle Sub-basin is a Mesozoic rift basin in the Northern Carnarvon Basin. Oil discovered at Nebo-1 highlights an active petroleum system. 3D seismic interpretation identified pre, syn and post-rift megasequences. Pre-rift fluvio-deltaic and marine sediments were deposited during a thermal sag phase of the Westralian Super Basin. Low rates of extension (Rhaetian to Oxfordian) deposited fluvio-deltaic and marine sediments. During early post-rift thermal subsidence, sediments onlapped and eroded tilted fault blocks formed during the syn-rift phase. Consequently the regional seal (Early Cretaceous Muderong Shale) is absent in the centre. Subsequent successions are dominated by a prograding carbonate wedge showing evidence of erosion from tectonic and eustatic sea level change. 1D burial history modeling of Nebo-1 and Manaslu-1 show that all source rocks are currently at their maximum depths of burial. Sediments to the Late Cretaceous are in the early maturity window for both wells. The Middle Jurassic Legendre Formation reaches mid maturity in Nebo-1. Source, reservoir and seals are present throughout the Triassic to earliest Cretaceous, however, the absence of the regional seal in the central sub-basin reduces exploration targets. The lack of significant inversion increases the likelihood of maintaining trap integrity. Potential plays include compaction folds over tilted horst blocks, roll over and possible inversion anticlines, basin floor fans and intra-formational traps within fluvio-deltaic deposits. Late Cretaceous and younger sediments are unlikely to host significant hydrocarbons due to lack of migration pathways. Source rocks are of adequate maturity and deep faults act as pathways for hydrocarbon migration.

Poster Paper submission detailing the progress, benefits and vision of the Unlocking the Landsat Archive Project

We report four lessons from experience gained in applying the multiple-mode spatially-averaged coherency method (MMSPAC) at 25 sites in Newcastle (NSW) for the purpose of establishing shear-wave velocity profiles as part of an earthquake hazard study. The MMSPAC technique is logistically viable for use in urban and suburban areas, both on grass sports fields and parks, and on footpaths and roads. A set of seven earthquake-type recording systems and team of three personnel is sufficient to survey three sites per day. The uncertainties of local noise sources from adjacent road traffic or from service pipes contribute to loss of low-frequency SPAC data in a way which is difficult to predict in survey design. Coherencies between individual pairs of sensors should be studied as a quality-control measure with a view to excluding noise-affected sensors prior to interpretation; useful data can still be obtained at a site where one sensor is excluded. The combined use of both SPAC data and HVSR data in inversion and interpretation is a requirement in order to make effective use of low frequency data (typically 0.5 to 2 Hz at these sites) and thus resolve shear-wave velocities in basement rock below 20 to 50 m of soft transported sediments.

Climate change is expected to increase severe wind hazard in many regions of the Australian continent with consequences for exposed infrastructure and human populations. The objective of this paper is to provide an initial nationally consistent assessment of wind risk under current climate, utilizing the Australian/New Zealand wind loading standard (AS/NZS 1170.2, 2002) as a measure of the hazard. This work is part of the National Wind Risk Assessment (NWRA), which is a collaboration between the Australian Federal Government (Department of Climate Change and Energy Efficiency) and Geoscience Australia. It is aimed at highlighting regions of the Australian continent where there is high wind risk to residential structures under current climate, and where, if hazard increases under climate change, there will be a greater need for adaptation. This assessment is being undertaken by separately considering wind hazard, infrastructure exposure and the wind vulnerability of residential buildings. The NWRA will provide a benchmark measure of wind risk nationally (current climate), underpinned by the National Exposure Information System (NEXIS; developed by Geoscience Australia) and the wind loading standard. The methodology which determines the direct impact of severe wind on Australian communities involves the parallel development of the understanding of wind hazard, residential building exposure and the wind vulnerability of residential structures. We provide the current climate wind risk, expressed as annualized loss, based on the wind loading standard.

This paper describes the methods used to define earthquake source zones and calculate their recurrence parameters (a, b, Mmax). These values, along with the ground motion relations, effectively define the final hazard map. Definition of source zones is a highly subjective process, relying on seismology and geology to provide some quantitative guidance. Similarly the determination of Mmax is often subjective. Whilst the calculation of a and b is quantitative, the assumptions inherent in the available methods need to be considered when choosing the most appropriate one. For the new map we have maximised quantitative input into the definition of zones and their parameters. The temporal and spatial Poisson statistical properties of Australia's seismicity, along with models of intra-plate seismicity based on results from neotectonic, geodetic and computer modelling studies of stable continental crust, suggest a multi-layer source zonation model is required to account for the seismicity. Accordingly we propose a three layer model consisting of three large background seismicity zones covering 100% of the continent, 25 regional scale source zones covering ~50% of the continent, and 44 hotspot zones covering 2% of the continent. A new algorithm was developed to calculate a and b. This algorithm was designed to minimise the problems with both the maximum likelihood method (which is sensitive to the effects of varying magnitude completeness at small magnitudes) and the least squares regression method (which is sensitive to the presence of outlier large magnitude earthquakes). This enabled fully automated calculation of a and b parameters for all sources zones. The assignment of Mmax for the zones was based on the results of a statistical analysis of neotectonic fault scarps.

Legacy product - no abstract available

The Asia-Pacific region is highly susceptible to a variety of natural hazards. In particular, geophysical and atmospheric hazards threaten the livelihood of people within the region and the impacts of these hazards can significantly affect economic development. The Australian Agency for International Development (AusAID) has identified Disaster Risk Reduction as a priority in a number of countries in the Asia-Pacific region. Geoscience Australia is partnering with AusAID to strengthen the capacity of governments in Indonesia, the Philippines and Papua New Guinea to undertake natural hazard risk and impact analysis. The objective of these programs is to better prepare for, and protect from, natural disasters by informing the reduction in risk from various hazards. It is also expected that this enhanced capacity can be further applied to climate change impacts analysis. A key aspect of each the programs is the application of spatial information for hazard modelling, development of information on exposure (e.g. elements at risk such as residential buildings, key facilities, infrastructure) and the understanding of the vulnerability of structures, communities and infrastructure. Geoscience Australia is providing technical leadership and support to partner agencies in the identification of existing datasets and through provision of new and enhanced data. Geoscience Australia is supporting the development and management of value-added, spatially-enabled datasets in a number of locations to underpin the natural hazard risk analysis process. These activities also aim to provide technical partners with repeatable techniques and sustainable tools for the ongoing development and maintenance of these datasets into the future.

An orogenic cycle typically follows a sequence of events or stages. These are basin formation and magmatism during extension, inversion and crustal thickening during contractional orogenesis, and finally extensional collapse of the orogen. The Archaean granite-greenstone terranes of the Eastern Yilgarn Craton (EYC) record a major deviation in this sequence of events. Within the overall contractional stage, the EYC underwent a lithospheric-scale extensional event between 2665 Ma and 2655 Ma, resulting in changes to the entire orogenic system. These changes associated with regional extension include: the crustal architecture; greenstone stratigraphy; granite magmatism; thermo-barometry (PTt paths); and structure. Synchronous with these changes was the deposition of the first significant gold, and it is likely that the intra-orogenic extensional event was one of the critical factors in the region's world-class gold endowment.