Authors / CoAuthors
Abstract
This resource contains multibeam bathymetry data collected as part of the Darwin and Bynoe Harbour Habitat Mapping Project undertaken by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Northern Territory Government (Department of Environment and Natural Resources). The data were acquired during the period from 3 to 27 May 2016 on the RV Solander (survey SOL6432/GA04452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Environment and Natural Resources, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) project is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high-resolution geophysical (multibeam bathymetry) data for Bynoe Harbour; 2. Characterise seabed substrates (multibeam acoustic backscatter properties, seabed sediment grainsize, sediment chemistry) for Bynoe Harbour; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, seabed still images and video footage of grab sample locations, and oceanographic information including tidal data and water column sound velocity profiles. This V1 dataset contains two 2m resolution 32-bit geotiff of the SOL6432 survey area produced from the processed Kongsberg EM2040C bathymetry data. A detailed account of the survey is provided in: Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T. 2016. Bynoe Harbour Marine Survey 2016: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.004. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.
Product Type
dataset
eCat Id
144556
Contact for the resource
Point of contact
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Point of contact
- Contact instructions
- PSCD
Resource provider
Digital Object Identifier
Keywords
- theme.ANZRC Fields of Research.rdf
-
- EARTH SCIENCES
- ( {1} )
-
- HVC_144641
- ( Theme )
-
- Marine
- ( {1} )
-
- Bathymetry
- ( Instrument )
-
- Multibeam
- ( Product )
-
- Bathymetric grids
- ( Project )
-
- AusSeabed
- ( {1} )
-
- Marine Data
- ( {1} )
-
- Published_External
Publication Date
2020-12-15T22:44:49
Creation Date
Security Constraints
Legal Constraints
Status
completed
Purpose
Bathymetry Survey
Maintenance Information
asNeeded
Topic Category
geoscientificInformation
Series Information
Geosciences
Lineage
While AusSeabed aims to publish data to the level of adherence based on the requirements stated in the AusSeabed multibeam guidelines (version 1), we will also publish interim products (version 0) that are currently available, but have not yet been standardised (version 1). Users should be aware that V1 products will always supersede V0 products. This is a V1 product for GA4452. The Chief scientist onboard was Dr. Justy Siwabessy. This dataset was produced using CARIS HIPS/SIPS v.11.3.7 For any metadata questions, please download the Metadata.txt file with the dataset. Processing methodology: 1. A vessel configuration file was created where the co-ordinates of the motion sensor, DGPS antenna and patch test offsets were recorded. 2. A new project was created and the vessel configuration file attached to the project file. 3. The raw swath sonar data files, in raw.all format, for each line was imported into the project and the vessel information assigned to the data. Ellipsoid vertical reference system is our first preference and when not available or possible to do so, a tidal zone data is the next preference to be applied to the data 4. The motion sensor, DGPS and heading data were cleaned using a filter that averaged adjacent data to remove artefacts. 5. Sound velocity profiles data for each block of the data were attached to the corresponding raw swath sonar data files. 6. A new blank fieldsheet area was defined that specified the geographic area of study and the co-ordinate system used. 7. The data was cleaned by applying several filters that removed any spikes in the data using user defined threshold values. 8. Data were inspected visually for each line where artifacts and noisy data had not removed by the filtering process. 9. Remaining spikes were removed manually using the swath and subset editor modules. 10. All the data, i.e. bathymetric sounding and ancillary data, were merged to produce the final processed data file 11. A weighted grid of the processed data was then created. 12. Independent velocity corrections were performed where velocity artefacts were observed. 13. The final processed grid was exported as two 32 bit Geotif format at 2 m resolution referenced to ellipsoid and to mean sea level.
Parent Information
Extents
[-12.40, -11.40, 129.40, 131.00]
Reference System
WGS 84 (EPSG:4326)
Spatial Resolution
1m
Service Information
Associations
Source Information