Various aspects of isostasy concept are intimately linked to estimation of the elastic thickness of lithosphere, amplitude of mantle-driven vertical surface motions, basin uplift and subsidence. Common assumptions about isostasy are not always justified by existing data. For example, refraction seismic data provide essential constraints to estimation of isostasy, but are rarely analysed in that respect. Average seismic velocity, which is an integral characteristic of the crust to any given depth, can be calculated from initial refraction velocity models of the crust. Geoscience Australia has 566 full crust models derived from the interpretation of such data in its database as of January 2012. Average velocity through velocity/density regression translates into average density of the crust, and then into crustal column weight to any given depth. If average velocity isolines become horizontal at some depth, this may be an indication of balanced mass distribution (i.e., isostasy) in the crust to that depth. For example, average velocity distribution calculated for a very deep Petrel sedimentary basin on the Australian NW Margin shows no sign of velocity isolines flattening with depth all the way down to at least 15 km below the deepest Moho. Similar estimates for the Mount Isa region lead to opposite conclusions with balancing of average seismic velocities achieved above the Moho. Here, we investigate average seismic velocity distribution for the whole Australian continent and its margins, uncertainties of its translation into estimates of isostasy, and the possible explanations for misbalances in isostatic equilibrium of the Australian crust.

The Oaklands-Coorabin Coalfield in the Riverina Division of New South Wales has been known for many years. Seismic refraction tests were carried out on a number of sections to assist in the interpretation of the gravity results during July and Sepetember, 1949.

Bureau of Mineral Resources conducted a seismic refraction survey during February 6th and March 5th, 1951. This survey aimed to resolve the shallow structure on the Comet anticlinal structure, 60 miles north of Rolleston for the oil exploration purpose.

These notes deal with a brief experimental seismic survey undertaken by the Bureau of Mineral Resources for the Victoria Railways. The object of the survey was to determine whether the seismic refraction method was suitable for subsurface exploration in the area between Dynon and Footscray Roads, West Melbourne. The information desired by the Railways was concerned with the existence or otherwise of a "foundation" rock capable of supporting constructions associated with railway sidings and marshalling yards. Records of seismic refractions were obtained along three traverses.

Details and results are given of a seismic refraction survey made at the request of the Hydro-Electric Commission of Tasmania, to investigate the site of the western portal of the proposed Mossy Marsh Tunnel. The tunnel is part of the No. 2 Tarraleah Canal project to transport water from Lake King William to Tarraleah Power Station. The primary object of the survey was to determine the thickness of till overlying the dolerite bedrock, and hence contours of the bedrock surface.

The geophysical survey described in this report was undertaken at the request of the Snowy Mountains Authority for the purpose of investigating possible sites for the proposed Spencer's Creek dam. The area surveyed is about two miles above the junction of Spencer's Creek with the Snowy River, about six miles east of the summit of Mt. Kosciuszko, and at an average elevation of about 5,700 feet above sea level. The specific information sought by the survey comprised the following: depth and nature of the bedrock, contours of the bedrock surface, nature of the overburden, and in particular, variations in physical properties occurring either horizontally or vertically. The seismic refraction method was used in the survey. This report gives an account of the geophysical survey and its results.

At the request of the State Rivers and Water Supply Commission of Victoria, seismic tests using the refraction method were conducted over six well locations near Cobram in the Murray Valley Irrigation District of Central Northern Victoria. The purpose of the tests was to determine whether the depth of the water table in that area could be measured by seismic refraction methods. The problem of rising water tables is one which occurs commonly in irrigation districts. In some areas the problem is purely a local one in which only perched water tables, any within ten feet of the surface, are involved, but it is also possible that the level of the general water table over a large are may be raised by deep percolation. The State Rivers are Water Supply Commission have maintained a check on the water table depth in the Murray River Valley Irrigation District for some time by measurement in existing wells. These wells are not necessarily in the best positions, and some are falling in. The seismic method was considered as an alternative to expensive test boring for ground water measurement.

<p><b> Please note: This record has been made available internally for reference only</b> <p>PIMS is a search tool for discovery of survey and well data assets and physical samples held by the Geoscience Australia Repository. Data can be ordered and viewing of samples can be arranged via an online form. Although this is public data, fees are charged to cover the cost of transcription and delivery.

The term 'modelling while interpreting' refers to the use of 3D models during the interpretation of reflection seismic data in order to inform that process. Rather than using 3D models at a final stage of the project just to display results, new software tools are emerging to enable development of 3D models in parallel with the seismic interpretation work. These tools provide additional means to help interpreters make informed decisions such as where to pick basement and to check the 3D integrity of their geological models. Applications of this new workflow are illustrated through a recently completed petroleum prospectivity assessment of the Capel and Faust frontier deep-water basins located 800 km to the east of Brisbane. Geoscience Australia acquired 2D geophysical data across these basins in 2007 and subsequently mapped the complex distribution of sub-basins by integrating 2D time-domain seismic interpretation with 3D gravity modelling. Forward and inverse 3D gravity models were used to inform the seismic interpretation and test the seismic basement pick. The identification of basement was problematic due to a lack of wells and the likelihood that acoustic basement represented older sedimentary material intruded by igneous rocks. Sonobuoy refraction data were modelled to achieve conversion of travel times to depth and estimate densities. Modelling gravity while interpreting reflection seismic data improved confidence in the mapping of the extent and thickness of sediments in these basins, and has potential to be used more widely in mapping projects to reduce exploration risk.

A hybrid high-resolution seismic survey was undertaken adjacent to the Eurabba State Forest near Quandialla, Western NSW between June 29 and July 3 2003 acquiring both refraction and reflection data. The Australian National Seismic Imaging Resource (ANSIR) carried out the field work in conjunction with University of Canberra and Dryland Salinity Hazard Mitigation Program (DSHMP) research staff and students. Processing of the acquired refraction information was performed with the assistance of ANSIR staff. This survey was designed to collect and compare a shallow, high-resolution seismic dataset against nearby regional scale seismic datasets and other complementary sources of spatial information including NanoTEM, drill hole data, satellite imagery and regolith-landform mapping. The multi-disciplinary approach is designed for imaging shallow sedimentary structures and determining depth to bedrock. The combined aim of utilizing the multidisciplinary approach is to understand shallow fluid flow within the Booberoi-Quandialla Transect area and how this relates to observed outbreaks of dryland salinity. These observations will aid in the development of a shallow fluid flow model for the Bland catchment, especially over the Booberoi-Quandialla Transect area.