From 1 - 9 / 9
  • A SkyTEM airborne electromagnetic (AEM) survey was flown over Surat and Galilee regions of Queensland, Australia during July 2017. The Surat-Galilee area was surveyed, with multiple survey sites in Orana, Injune and Galilee. The area is comprised of 1293 line kilometres in Orana, 552 line kilometres in Injune and 2922 line kilometres in Galilee. A total of 4767 line kilometres were flown for this survey. The projected grid coordinates have been supplied in GDA94 MGA Zone 55 for Galilee and Injune and in MGA zone 56 for Orana. The aim of the survey is to provide at a reconnaissance scale: a) trends in regolith thickness and variability b) variations in bedrock conductivity c) conductivity of key bedrock (lithology related) conductive units under cover d) the groundwater resource potential of the region e) palaeovalley systems known to exist in the region.

  • <div>Geoscience Australia and CSIRO have collaborated, under the Exploring for the Future program, to investigate whether water-saturated residual oil zones (ROZs), sometimes associated with conventional Australian hydrocarbon plays, could provide a CO2 storage resource and enhance the storage capacity of depleted fields. This product is part of a larger project that includes, among others, a reservoir modelling component. </div><div>This report focuses on our petrophysical module of work that investigated the occurrence and character of ROZs in onshore Australian basins. Our findings demonstrate that ROZs occur in Australia’s hydrocarbon-rich regions, particularly in the Cooper-Eromanga Basin. ROZs with more than 10% residual oil saturation are uncommon, likely due to small original oil columns and lower residual saturations retained in sandstone reservoirs than in classic, carbonate-hosted North American ROZs. Extensive, reservoir-quality rock is found below the deepest occurring conventional oil in many of the fields in the Eromanga Basin, potentially offering significant CO2 storage capacity.&nbsp;</div><div>For more information about this project and to access the related studies and products, see: https://www.eftf.ga.gov.au/carbon-co2-storage-residual-oil-zones. </div><div><br></div>

  • This report, completed as part of Geoscience Australia’s Exploring for the Future Program National Groundwater Systems (NGS) Project, presents results of the second iteration of 3D geological and hydrogeological surfaces across eastern Australian basins. The NGS project is part of the Exploring for the Future (EFTF) program—an eight-year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program. The program seeks to inform decision-making by government, community, and industry on the sustainable development of Australia's mineral, energy, and groundwater resources, including those to support the effective long-term management of GAB water resources. This work builds on the first iteration completed as part of the Great Artesian Basin Groundwater project. The datasets incorporate infills of data and knowledge gaps in the Great Artesian Basin (GAB), Lake Eyre Basin (LEB), Upper Darling Floodplain (UDF) and existing data in additional basins in eastern Australia. The study area extends from the offshore Gulf of Carpentaria in the north to the offshore Bight, Otway, and Gippsland basins in the South and from the western edge of the GAB in the west to the eastern Australian coastline to the east. The revisions are an update to the surface extents and thicknesses for 18 region-wide hydrogeological units produced by Vizy & Rollet, 2022. The second iteration of the 3D model surfaces further unifies geology across borders and provides the basis for a consistent hydrogeological framework at a basin-wide, and towards a national-wide, scale. The stratigraphic nomenclature used follows geological unit subdivisions applied: (1) in the Surat Cumulative Management Area (OGIA - Office of Groundwater Impact Assessment, 2019) to correlate time equivalent regional hydrogeological units in the GAB and other Jurassic and Cretaceous time equivalent basins in the study area and (2) in the LEB to correlate Cenozoic time equivalents in the study area. Triassic to Permian and older basins distribution and thicknesses are provided without any geological and hydrogeological unit sub-division. Such work helps to (1) reconcile legacy and contemporary regional studies under a common stratigraphic framework, (2) support the effective management of groundwater resources, and (3) provide a regional geological context for integrated resource assessments. The 18 hydrogeological units were constructed using legacy borehole data, 2D seismic and airborne electromagnetic (AEM) data that were compiled for the first iteration of the geological and hydrogeological surfaces under the GAB groundwater project (Vizy & Rollet, 2022a) with the addition of: • New data collected and QC’d from boreholes (including petroleum, CSG [Coal Seam Gas], stratigraphic, mineral and water boreholes) across Australia (Vizy & Rollet, 2023a) since the first iteration, including revised stratigraphic correlations filling data and knowledge gaps in the GAB, LEB, UDF region (Norton & Rollet, 2023) with revised palynological constraints (Hannaford & Rollet 2023), • Additional AEM interpretation since the first iteration in the GAB, particularly in the northern Surat (McPherson et al., 2022b), as well as in the LEB (Evans et al., in prep), in the southern Eromanga Basin (Wong et al., 2023) and in the UDF region (McPherson et al., 2022c), and • Additional 2D seismic interpretation in the Gulf of Carpentaria (Vizy & Rollet, 2023b) and in the western and central Eromanga Basin (Szczepaniak et al., 2023). These datasets were then analysed and interpreted in a common 3D domain using a consistent chronostratigraphic framework tied to the geological timescale of 2020, as defined by Hannaford et al. (2022). Confidence maps were also produced to highlight areas that need further investigation due to data gaps, in areas where better seismic depth conversion or improved well formation picks are required. New interpretations from the second iteration of the 18 surfaces include (1) new consistent and regionally continuous surfaces of Cenozoic down to Permian and older sediments beyond the extent of the GAB across eastern Australia, (2) revised extents and thicknesses of Jurassic and Cretaceous units in the GAB, including those based on distributed thickness, (3) revised extents and thicknesses of Cenozoic LEB units constrained by the underlying GAB 3D model surfaces geometry. These data constraints were not used in the model surfaces generated for the LEB detailed inventory (Evans et al., 2023), and (4) refinements of surfaces due to additional seismic and AEM interpretation used to infill data and knowledge gaps. Significant revisions include: • The use of additional seismic data to better constrain the base of the Poolowanna-Evergreen formations and equivalents and the top of Cadna-owie Formation and equivalents in the western and central Eromanga Basin, and the extent and thicknesses of the GAB units and Cenozoic Karumba Basin in the Gulf of Carpentaria, • The use of AEM interpretations to refine the geometry of outcropping units in the northern Surat Basin and the basement surface underneath the UDF region, and • A continuous 3D geological surface of base Cenozoic sediments across eastern Australia including additional constraints for the Lake Eyre Basin (borehole stratigraphy review), Murray Basin (AEM interpretation) and Karumba Basin (seismic interpretation). These revisions to the 18 geological and hydrogeological surfaces will help improve our understanding on the 3D spatial distribution of aquifers and aquitards across eastern Australia, from the groundwater recharge areas to the deep confined aquifers. These data compilations and information brought to a common national standard help improve hydrogeological conceptualisation of groundwater systems across multiple jurisdictions to assist water managers to support responsible groundwater management and secure groundwater into the future. These 3D geological and hydrogeological modelled surfaces also provide a tool for consistent data integration from multiple datasets. These modelled surfaces bring together variable data quality and coverage from different databases across state and territory jurisdictions. Data integration at various scale is important to assess potential impact of different water users and climate change. The 3D modelled surfaces can be used as a consistent framework to map current groundwater knowledge at a national scale and help highlight critical groundwater areas for long-term monitoring of potential impacts on local communities and Groundwater Dependant Ecosystems. The distribution and confidence on data points used in the current iteration of the modelled surfaces highlight where data poor areas may need further data acquisition or additional interpretation to increase confidence in the aquifers and aquitards geometry. The second iteration of surfaces highlights where further improvements can be made, notably for areas in the offshore Gulf of Carpentaria with further seismic interpretation to better constrain the base of the Aptian marine incursion (to better constrain the shape and offshore extent of the main aquifers). Inclusion of more recent studies in the offshore southern and eastern margins of Australia will improve the resolution and confidence of the surfaces, up to the edge of the Australian continental shelf. Revision of the borehole stratigraphy will need to continue where more recent data and understanding exist to improve confidence in the aquifer and aquitard geometry and provide better constraints for AEM and seismic interpretation, such as in the onshore Carpentaria, Clarence-Moreton, Sydney, Murray-Darling basins. Similarly adding new seismic and AEM interpretation recently acquired and reprocessed, such as in the eastern Eromanga Basin over the Galilee Basin, would improve confidence in the surfaces in this area. Also, additional age constraints in formations that span large periods of time would help provide greater confidence to formation sub-divisions that are time equivalent to known geological units that correlate to major aquifers and aquitards in adjacent basins, such as within the Late Jurassic‒Early Cretaceous in the Eromanga and Carpentaria basins. Finally, incorporating major faults and structures would provide greater definition of the geological and hydrogeological surfaces to inform with greater confidence fluid flow pathways in the study area. This report is associated with a data package including (Appendix A – Supplementary material): • Nineteen geological and hydrogeological surfaces from the Base Permo-Carboniferous, Top Permian, Base Jurassic, Base Cenozoic to the surface (Table 1.1), • Twenty-one geological and hydrogeological unit thickness maps from the top crystalline basement to the surface (Figure 3.1 to Figure 3.21), • The formation picks and constraining data points (i.e., from boreholes, seismic, AEM and outcrops) compiled and used for gridding each surface (Table 2.7). Detailed explanation of methodology and processing is described in the associated report (Vizy & Rollet, 2023).

  • <b>This data package is superseded by a second iteration presenting updates on 3D geological and hydrogeological surfaces across eastern Australia that can be accessed through </b><a href="https://dx.doi.org/10.26186/148552">https://dx.doi.org/10.26186/148552</a> The Australian Government, through the National Water Infrastructure Fund – Expansion, commissioned Geoscience Australia to undertake the project ‘Assessing the Status of Groundwater in the Great Artesian Basin’ (GAB). The project commenced in July 2019 and will finish in June 2022, with an aim to develop and evaluate new tools and techniques to assess the status of GAB groundwater systems in support of responsible management of basin water resources. While our hydrogeological conceptual understanding of the GAB continues to grow, in many places we are still reliant on legacy data and knowledge from the 1970s. Additional information provided by recent studies in various parts of the GAB highlights the level of complexity and spatial variability in hydrostratigraphic units across the basin. We now recognise the need to link these regional studies to map such geological complexity in a consistent, basin-wide hydrostratigraphic framework that can support effective long-term management of GAB water resources. Geological unit markers have been compiled and geological surfaces associated with lithostratigraphic units have been correlated across the GAB to update and refine the associated hydrogeological surfaces. Recent studies in the Surat Basin in Queensland and the Eromanga Basin in South Australia are integrated with investigations from other regions within the GAB. These bodies of work present an opportunity to link regional studies and develop a revised, internally consistent geological framework to map geological complexity across the GAB. Legacy borehole data from various sources, seismic and airborne electromagnetic (AEM) data were compiled, then combined and analysed in a common 3D domain. Correlation of interpreted geological units and stratigraphic markers from these various data sets are classified using a consistent nomenclature. This nomenclature uses geological unit subdivisions applied in the Surat Cumulative Management Area (OGIA (Office of Groundwater Impact Assessment), 2019) to correlate time equivalent regional hydrogeological units. Herein we provide an update of the surface extents and thicknesses for key hydrogeological units, reconciling geology across borders and providing the basis for a consistent hydrogeological framework at a basin-wide scale. The new surfaces can be used for facilitating an integrated basin systems assessment to improve our understanding of potential impacts from exploitation of sub-surface resources (e.g., extractive industries, agriculture and injection of large volumes of CO2 into the sub-surface) in the GAB and providing a basis for more robust water balance estimates. This report is associated with a data package including (Appendix A – Supplementary material): • Nineteen geological and hydrogeological surfaces from the Base Permo-Carboniferous, Top Permian, Base Jurassic, Base Cenozoic to the surface (Table 2.1), • Twenty-one geological and hydrogeological unit thickness maps from the top crystalline basement to the surface (Figure 3.7 to Figure 3.27), • The formation picks and constraining data points (i.e., from boreholes, seismic, AEM and outcrops) compiled and used for gridding each surface (Table 3.8).

  • The Great Artesian Basin (GAB), a hydrogeological entity that contains predominantly the Jurassic-Cretaceous Eromanga, Surat and Carpentaria geological basins, is the largest groundwater basin in Australia. It underlies one fifth of the continent, including parts of Queensland, New South Wales, South Australia and the Northern Territory. Groundwater from the GAB is a vital resource for agricultural and extractive industries, as well as for community water supply. It supports cultural values and sustains a range of groundwater-dependent ecosystems. Water managers from each jurisdiction regulate GAB resources using hydrogeological conceptualisations based on a diverse historical geoscientific nomenclature that is often unique to a jurisdiction. However, the basin and its resources are continuous across borders, and recent studies have shown high spatial variability in the hydrostratigraphic units across the basin. There is, therefore, a clear need to map the geological complexity consistently at a basin-wide scale in order to provide a hydrogeological framework to underpin effective long-term management of GAB water resources. The present study is part of the Australian Government funded project ‘Assessing the Status of Groundwater in the Great Artesian Basin’ to refine the basin conceptualisation and water balance estimates (Figure 1.1). This study focuses on an updated GAB hydrogeological architecture by compiling and standardising existing and newly interpreted biostratigraphic and well formation picks from geological logs, 2D seismic and airborne electromagnetic data in a consistent chronostratigraphic framework. This framework is used to correlate geological units across the GAB. The basin-wide correlation identifies age-equivalent sediments in different depositional settings encompassing transgressive and regressive phases. Biostratigraphic control using a common unified zonation scheme is used to identify lithological correlations. Rock properties are attributed based on sediment facies deposited during similar geological events. The approach provides a consistent way of mapping the distribution and properties of aquifers and aquitards across the GAB. In particular, the refined correlation of Jurassic and Cretaceous units between the Surat and Eromanga basins improves the resolution of hydrogeological unit geometry and lithological variation that may influence groundwater flow within and between aquifers. The 3D hydrogeological architecture developed provides a model for refining hydrogeological conceptualisations and assists in revising GAB water balance estimates. Key findings are: • The new 3D model of the GAB extends the connectivity of aquifers across the entire GAB, with potential implications for jurisdictional groundwater management. For example, the Adori Sandstone, which was previously mapped largely in the central and eastern Eromanga Basin, potentially has connectivity with the time-equivalent Springbok Sandstone in the Surat Basin across the boundary between the two basins (the Nebine Ridge). Coincident with the Nebine Ridge is a groundwater divide that tends to segregate groundwater flow between the two basins. However, cumulative impacts from excessive pumping could cause the groundwater divide to migrate due to the continuation of sandstone unit (and connectivity) across the Nebine Ridge. In addition, the Adori Sandstone is connected with the time-equivalent Algebuckina Sandstone found towards the western margin of the Eromanga Basin, which suggests there is potential for connectivity from basin margin to basin centre. This key finding improves estimates of volume and distribution of sandstone of this aquifer across all GAB jurisdictions. • The extent of other hydrogeological units have also been refined. For instance the Cadna-owie-Hooray aquifer of Ransley et al. (2015) is now separated into two units 1. Murta Formation/Hooray–Namur–Mooga sandstones aquifer and the 2. Cadna-owie–Bungil formation and equivalents aquifer. The updated mapping highlights that the upper Cadna-owie‒Bungil‒Wyandra aquifer extends across the whole GAB, and is potentially confined by the underlying Murta and lower Cadna-owie‒Bungil aquitards and overlying Rolling Downs aquitard. Higher resolution mapping of sub-units within the Cadna-owie–Bungil–Hooray and equivalents aquifer provides an improved understanding of lithological variability and the potential compartmentalisation of groundwater that may be isolated from from regional flow paths (i.e. ‘dead ends’). The lithological variability mapping within hydrogeological units highlights zones of potential connectivity where leakage may occur between the deeper and shallower aquifers, affecting upward loss of groundwater from GAB aquifers in areas distal to the outcropping recharge beds. • The new lithology mapping also highlights that the Birkhead and Westbourne formations, classified as interbedded aquitard and tight aquitard, respectively, in the Eromanga Basin, correlate laterally with time-equivalent intervals within the Algebuckina Sandstone aquifer, suggesting connection between the Hutton, Adori and Namur‒Hooray aquifers across the central and western Eromanga Basin. • The new 3D model updates hydrogeological conceptualisations in the GAB and improves groundwater balance estimates for the GAB (Ransley et al., 2022.). It is also used to constrain a regional-scale groundwater flow dynamics model for the region, including uncertainty analysis within a Bayesian framework (Knight et al., 2022). This aspect of the study is assessing a powerful approach for solving non-unique inverse problems in terms of quantifying model uncertainty. This is crucial in providing a context for, and awareness of, uncertainties in system conceptualisation that need to be accounted for, or at least acknowledged up front. • This study compiles, collates and integrates existing and newly acquired geoscientific data characterising Jurassic Cretaceous geological units that represent the hydrostratigraphy of the GAB. The updated stratigraphy improved correlations between the Eromanga, Surat and Carpentaria basins leading to better hydrogeological interpretations at the whole of GAB scale. The work draws upon the results of other recent studies to gain new insights into the geological architecture and depositional history, which have implications for groundwater occurrence and flow within and between key GAB aquifers. This updated understanding has basin-wide implications for water management, and plays a key role in revising water balance estimates for the whole GAB. The chronostratigraphic approach used here can be applied at a national scale to correlate consistently hydrostratigraphic units, providing a broader context for groundwater systems assessments.

  • <div><strong>Output Type: </strong>Exploring for the Future Extended Abstract</div><div><br></div><div><strong>Short Abstract: </strong>Australia's Great Artesian Basin (GAB) is a vital groundwater system extending across parts of Queensland, New South Wales, South Australia, and the Northern Territory, crucial for community water supplies, economic development, indigenous cultural values and groundwater dependent ecosystems. Managing GAB groundwater poses challenges due to the complex structure of the sedimentary basin, requiring a better understanding of aquifers, aquitards, and hydraulic connections at a whole GAB scale. Additionally, inconsistencies in nomenclature and subdivisions across the basin further complicate the definition and description of these strata. This study employs an integrated basin analysis workflow using new and existing data to create a 3D geological model tied to a consistent chronostratigraphic framework and State and Territory hydrostratigraphic classifications. The model refines the characteristics of 18 hydrogeological units, offering insights into aquifer boundaries and connectivity. This comprehensive approach enhances the 'whole-of-Basin' subsurface geological understanding, benefiting groundwater management, resource assessments, uncertainty risk assessment and environmental impact assessments across multiple jurisdictions and the broader resource sector (e.g., Carbone Capture and Storage and hydrogen).</div><div><br></div><div><strong>Citation: </strong>Rollet, N., Vizy, J., Norton, C.J., Hannaford, C., McPherson, A., Symington, N., Evans, T., Bradshaw, B., Szczepaniak, M., Bui Xuan Hy, A., Schoning, G. &amp; Keppel, M., 2024. Great Artesian Basin 3D chronostratigraphic model: providing new insights into hydrogeological variability and connectivity. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts. Geoscience Australia, Canberra, https://doi.org/10.26186/149235</div>

  • <div>This Geoscience Australia Record reports on Interferometric Synthetic Aperture Radar (InSAR) processing over the Great Artesian Basin (GAB) to support an improved understanding of the groundwater system and water balance across the region. InSAR is a geodetic technique that can identify ground surface movement from satellite data at a regional scale and is therefore a valuable and widely used technique for measuring patterns in surface movement over time; including the movement of fluids (i.e. water or gas) beneath the surface.</div><div><br></div><div>This Record is the one of two Geoscience Australia Records that describe ground surface movement monitoring Geoscience Australia have undertaken in the GAB in recent years. Namely;</div><div>1.&nbsp;&nbsp;&nbsp;&nbsp;Ground surface movement in the northern Surat Basin derived from campaign GPS measurements. (Garthwaite et al., 2022).</div><div>2.&nbsp;&nbsp;&nbsp;&nbsp;InSAR processing over the Great Artesian Basin and analysis over the western Eromanga Basin and northern Surat Basin (this Record).</div><div><br></div><div>We have produced ground surface motion data products, which cover about 90% of the GAB for the period of time between January 2016 and August 2020. The data products were created using Sentinel-1 Synthetic Aperture Radar (SAR) data and an InSAR processing workflow designed for large spatial scale processing. The large spatial scale InSAR processing workflow includes using GAMMA software to (i) pre-process SAR images to align the pixels, (ii) generate interferograms and short temporal baseline surface displacement maps and PyRate software to (iii) combine these outputs in an inversion to form pixel-wise time series ground surface displacement data and fit ground surface velocities to the displacement data. The raw SAR data and these subsequent data products of the workflow are partitioned into overlapping frames; the final stage of the large scale processing workflow is to combine the partitioned data into a single map using a mosaicking algorithm. The results of this processing chain demonstrate the feasibility of developing a regional scale ground surface movement reconnaissance tool (i.e. subsidence and uplift). </div><div><br></div><div>We provide a summary of the processing chain and data products and a focused assessment for two case study areas in the western Eromanga Basin (South Australia) and northern Surat Basin (Queensland). Over these case study areas we examine the relationship between the InSAR derived ground surface movement and available groundwater level data. We also assess how land use types may influence the InSAR derived ground surface motion data by comparing the InSAR data to the “land types” over the region which we classify using a machine learning algorithm with Sentinel-2 optical imagery data. </div><div><br></div><div>From our analysis we observe little ground surface motion over the western Eromanga Basin. The surface movement rate over the entire area is estimated to be mostly within ±10 mm/yr. Groundwater level time series data from well monitoring sites in the area did not appear to have any significant trends either. However, large and broad scale ground surface motion (both uplift and subsidence) was observed in the InSAR processing results over the northern Surat Basin. A 75 km x 150 km scale uplift signal, with rates of up to 20 mm/yr, was located over an area we classified as cultivated land, where InSAR signals are likely to be influenced by near-surface cultivation activities (such as irrigation) rather than subsurface groundwater level changes. Furthermore, two approximately 75km x 75 km areas were identified which had subsidence signals of up to -20 mm/yr. Over the same area, groundwater level time series data show long-term negative trends in the water head level. For a more direct comparison between the InSAR results and the well data, we fitted a first order poroelastic model to transform the InSAR derived ground surface motion rates into modelled pore-pressure decline/groundwater drawdown rates. We compared the model to the groundwater time series data in the Walloon Coal Measures, Surat Basin, and found good agreement, which indicates that the observed subsidence signals could be attributable to pore-pressure decline due to the falling water head level.</div><div><br></div><div>We finally provide some preliminary analysis comparing our InSAR results to the results from an Office of Groundwater Impact Assessment (OGIA) InSAR study and a Geoscience Australia GPS land movement study to assist in validating the Geoscience Australia InSAR results. Overall, the comparisons are encouraging, showing a high correlation against the OGIA InSAR results and GPS results. Further work, is required to further validate our results and reduce uncertainty in our analysis process.</div>

  • This data package, completed as part of Geoscience Australia’s National Groundwater Systems (NGS) Project, presents results of the second iteration of the 3D Great Artesian Basin (GAB) and Lake Eyre Basin (LEB) (Figure 1) geological and hydrogeological models (Vizy & Rollet, 2023) populated with volume of shale (Vshale) values calculated on 2,310 wells in the Surat, Eromanga, Carpentaria and Lake Eyre basins (Norton & Rollet, 2023). This provides a refined architecture of aquifer and aquitard geometry that can be used as a proxy for internal, lateral, and vertical, variability of rock properties within each of the 18 GAB-LEB hydrogeological units (Figure 2). These data compilations and information are brought to a common national standard to help improve hydrogeological conceptualisation of groundwater systems across multiple jurisdictions. This information will assist water managers to support responsible groundwater management and secure groundwater into the future. This 3D Vshale model of the GAB provides a common framework for further data integration with other disciplines, industry, academics and the public and helps assess the impact of water use and climate change. It aids in mapping current groundwater knowledge at a GAB-wide scale and identifying critical groundwater areas for long-term monitoring. The NGS project is part of the Exploring for the Future (EFTF) program—an eight-year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program. The program seeks to inform decision-making by government, community, and industry on the sustainable development of Australia's mineral, energy, and groundwater resources, including those to support the effective long-term management of GAB water resources. This work builds on the first iteration completed as part of the Great Artesian Basin Groundwater project (Vizy & Rollet, 2022; Rollet et al., 2022), and infills previous data and knowledge gaps in the GAB and LEB with additional borehole, airborne electromagnetic and seismic interpretation. The Vshale values calculated on additional wells in the southern Surat and southern Eromanga basins and in the whole of Carpentaria and Lake Eyre basins provide higher resolution facies variability estimates from the distribution of generalised sand-shale ratio across the 18 GAB-LEB hydrogeological units. The data reveals a complex mixture of sedimentary environments in the GAB, and highlights sand body development and hydraulic characteristics within aquifers and aquitards. Understanding the regional extents of these sand-rich areas provides insights into potential preferential flow paths, within and between the GAB and LEB, and aquifer compartmentalisation. However, there are limitations that require further study, including data gaps and the need to integrate petrophysics and hydrogeological data. Incorporating major faults and other structures would also enhance our understanding of fluid flow pathways. The revised Vshale model, incorporating additional boreholes to a total of 2,310 boreholes, contributes to our understanding of groundwater flow and connectivity in the region, from the recharge beds to discharge at springs, and Groundwater Dependant Ecosystems (GDEs). It also facilitates interbasinal connectivity analysis. This 3D Vshale model offers a consistent framework for integrating data from various sources, allowing for the assessment of water use impacts and climate change at different scales. It can be used to map groundwater knowledge across the GAB and identify areas that require long-term monitoring. Additionally, the distribution of boreholes with gamma ray logs used for the Vshale work in each GAB and LEB units (Norton & Rollet, 2022; 2023) is used to highlight areas where additional data acquisition or interpretation is needed in data-poor areas within the GAB and LEB units. The second iteration of surfaces with additional Vshale calculation data points provides more confidence in the distribution of sand bodies at the whole GAB scale. The current model highlights that the main Precipice, Hutton, Adori-Springbok and Cadna-owie‒Hooray aquifers are relatively well connected within their respective extents, particularly the Precipice and Hutton Sandstone aquifers and equivalents. The Bungil Formation, the Mooga Sandstone and the Gubberamunda Sandstone are partial and regional aquifers, which are restricted to the Surat Basin. These are time equivalents to the Cadna-owie–Hooray major aquifer system that extends across the Eromanga Basin, as well as the Gilbert River Formation and Eulo Queen Group which are important aquifers onshore in the Carpentaria Basin. The current iteration of the Vshale model confirms that the Cadna-owie–Hooray and time equivalent units form a major aquifer system that spreads across the whole GAB. It consists of sand bodies within multiple channel belts that have varying degrees of connectivity' i.e. being a channelised system some of the sands will be encased within overbank deposits and isolated, while others will be stacked, cross-cutting systems that provide vertical connectivity. The channelised systemtransitions vertically and laterally into a shallow marine environment (Rollet et al., 2022). Sand-rich areas are also mapped within the main Poolowanna, Brikhead-Walloon and Westbourne interbasinal aquitards, as well as the regional Rolling Downs aquitard that may provide some potential pathways for upward leakage of groundwater to the shallow Winton-Mackunda aquifer and overlying Lake Eyre Basin. Further integration with hydrochemical data may help groundtruth some of these observations. This metadata document is associated with a data package including: • Seventeen surfaces with Vshale property (Table 1), • Seventeen surfaces with less than 40% Vshale property (Table 2), • Twenty isochore with average Vshale property (Table 3), • Twenty isochore with less than 40% Vshale property (Table 4), • Sixteen Average Vshale intersections of less than 40% Vshale property delineating potential connectivity between isochore (Table 5), • Sixteen Average Vshale intersections of less than 40% Vshale property delineating potential connectivity with isochore above and below (Table 6), • Seventeen upscaled Vshale log intersection locations (Table 7), • Six regional sections showing geology and Vshale property (Table 8), • Three datasets with location of boreholes, sections, and area of interest (Table 9).

  • The Great Artesian Basin Research Priorities Workshop, organised by Geoscience Australia (GA), was held in Canberra on 27 and 28 April 2016. Workshop attendees represented a spectrum of stakeholders including government, policy, management, scientific and technical representatives interested in GAB-related water management. This workshop was aimed at identifying and documenting key science issues and strategies to fill hydrogeological knowledge gaps that will assist federal and state/territory governments in addressing groundwater management issues within the GAB, such as influencing the development of the next Strategic Management Plan for the GAB. This report summarises the findings out of the workshop.