<p>This record presents new zircon and titanite U–Pb geochronological data, obtained via Sensitive High Resolution Ion Microprobe (SHRIMP) for twelve samples of plutonic and volcanic rocks from the Lachlan Orogen and the New England Orogen, and two samples of hydrothermal quartz veins from the Cobar region. Many of these new ages improve existing constraints on the timing of mineralisation in New South Wales, as part of an ongoing Geochronology Project (Metals in Time), conducted by the Geological Survey of New South Wales (GSNSW) and Geoscience Australia (GA) under a National Collaborative Framework (NCF) agreement. The results herein (summarised in Table 1.1 and Table 1.2) correspond to zircon and titanite U–Pb SHRIMP analysis undertaken on GSNSW mineral systems projects for the reporting period July 2016–June 2017. Lachlan Orogen <p>The Lachlan Orogen samples reported herein are sourced from operating mines, active prospects, or regions with historical workings. The new dates constrain timing of mineralisation by dating the units which host or crosscut mineralisation, thereby improving understanding of the mineralising systems, and provide stronger constraints for mineralisation models. <p>In the eastern Lachlan Orogen, the new dates of 403.9 ± 2.6 Ma for the Whipstick Monzogranite south of Bega, and 413.3 ± 1.8 Ma for the Banshea Granite north of Goulburn both provide maximum age constraints for the mineralisation they host (Whipstick gold prospect and Ruby Creek silver prospect, respectively). At the Paupong prospect south of Jindabyne, gold mineralisation is cut by a dyke with a magmatic crystallisation age of 430.9 ± 2.1 Ma, establishing a minimum age for the system. <p>The 431.1 ± 1.8 Ma unnamed andesite and the 428.4 ± 1.9 Ma unnamed felsic dyke at the Dobroyde prospect 10 km north of Junee are just barely distinguishable in age, in the order that is supported by field relationships. The andesite is the same age as the c. 432 Ma Junawarra Volcanics but has different geochemical composition, and is younger than the c. 437 Ma Gidginbung Volcanics. The two unnamed units pre-date mineralisation, and are consistent with Pb-dating indicating a Tabberaberran age for mineralisation at the Dobroyde gold deposit. <p>Similarly, the 430.5 ± 3.4 Ma leucogranite from Hickory Hill prospect (north of Albury) clarifies that this unit originally logged as Jindera Granite (since dated at 403.4 ± 2.6 Ma) is instead affiliated with the nearby Mount Royal Granite, which has implications for the extent of mineralisation hosted within this unit. <p>Cobar Basin <p>Titanite ages of 382.5 ± 2.6 Ma and 383.4 ± 2.9 Ma from hydrothermal quartz veins that crosscut and postdate the main phase of mineralisation at the Hera mine in the Cobar region constrain the minimum age for mineralisation. These ages are indistinguishable from a muscovite age of 381.9 ± 2.2 Ma interpreted to be related to late- or post-Tabberaberan deformation event, and these results indicate that mineralisation occurred at or prior to this deformation event. <p>New England Orogen <p>The new ages from granites of the New England Orogen presented in this record aid in classification of these plutons into various Suites and Supersuites, and these new or confirmed relationships are described in detail in Bryant (2017). Many of these plutons host mineralisation, so the new ages also provide maximum age constraints in the timing of that mineralisation. <p>The 256.1 ± 1.3 Ma age of the Deepwater Syenogranite 40 km north of Glen Innes indicates that it is coeval with the 256.4 ± 1.6 Ma (Black, 2006) Arranmor Ignimbrite Member (Emmaville Volcanics) that it intrudes, demonstrating that both intrusive and extrusive magmatism was occurring in the Deepwater region at the same time. The 252.0 ± 1.2 Ma age for the Black Snake Creek Granite northeast of Tenterfield is consistent with its intrusive relationship with the Dundee Rhyodacite (254.34 ± 0.34 Ma; Brownlow et al., 2010). Similarly, the 251.2 ± 1.3 Ma age for the Malara Quartz Monzodiorite southeast of Tenterfield is consistent with field relationships that demonstrate that it intrudes the Drake Volcanics (265.3 ± 1.4 Ma–264.4 ± 2.5 Ma, Cross and Blevin, 2010; Waltenberg et al., 2016). <p>The 246.7 ± 1.5 Ma Cullens Creek Granite north of Drake was dated in an attempt to provide a stronger age constraint on mineral deposits that also cut the Rivertree and Koreelan Creek plutons (249.1 ± 1.3 Ma and 246.3 ± 1.4 Ma respectively, Chisholm et al., 2014a). However, the new age is indistinguishable from the Koreelan Creek Granodiorite, and timing of mineralisation is not further constrained, but the new age demonstrates a temporal association between the Cullens Creek and Koreelan Creek plutons. <p>The 239.1 ± 1.2 Ma age for the Mann River Leucogranite west of Grafton is indistinguishable in age from plutons in the Dandahra Suite and supports its inclusion in this grouping. The new age also constrains the timing of the distal part of the Dalmorton Gold Field, and implies that the gold vein system postdates the Hunter-Bowen orogeny. <p>The 232.7 ± 1.0 Ma Botumburra Range Monzogranite east of Armidale is younger than most southern New England granites, but this age is very consistent with the Coastal Granite Association (CGA), and the new age, along with the previously noted petrographic similarities (Leitch and McDougall, 1979) supports incorporation of the Botumburra Range Monzogranite into the Carrai Supersuite of the CGA (Bryant, 2017).

<div>Groundwater dependent ecosystems (GDEs) rely on access to groundwater on a permanent or intermittent basis to meet some or all of their water requirements (Richardson et al., 2011). The <a href="https://explorer-aws.dea.ga.gov.au/products/ga_ls_tc_pc_cyear_3">Tasselled Cap percentile products</a> created by Digital Earth Australia (2023) were used to identify potential GDEs for the upper Darling River floodplain study area. These percentile products provide statistical summaries (10th, 50th, 90th percentiles) of landscape brightness, greenness and wetness in imagery acquired between 1987 and present day. The 10th percentile greenness and wetness represent the lowest 10% of values for the time period evaluated, e.g. 10th greenness represents the least green period. In arid regions, areas that are depicted as persistently green and/or wet at the 10th percentile have the greatest potential to be GDEs. For this reason, and due to accessibility of the data, the 10th percentile Tasselled Cap greenness (TCG) and Tasselled Cap wetness (TCW) products were used as the basis for the assessment of GDEs for the upper Darling River floodplain study area. </div><div><br></div><div>This data release is an ESRI geodatabase, with layer files, including:</div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;original greenness and wetness datasets extracted; </div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;classified 10th percentile greenness and wetness datasets (used as input for the combined dataset); </div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;combined scaled 10th percentile greenness and wetness dataset (useful for a quick glance to identify potential groundwater dependent vegetation (GDV) that have high greenness and wetness e.g. river red gums)</div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;combined classified 10th percentile greenness and wetness dataset (useful to identify potential GDV/GDE and differentiate between vegetation types)</div><div><br></div><div>-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;coefficient of variation of 50th percentile greenness dataset (useful when used in conjunction with the scaled/combined products to help identify GDEs)</div><div><br></div><div>For more information and detail on these products, refer to <a href="https://dx.doi.org/10.26186/148545">https://dx.doi.org/10.26186/148545</a>.</div><div><br></div><div><strong>References</strong></div><div>Digital Earth Australia (2023). <em><a href="https://docs.dea.ga.gov.au">Digital Earth Australia User Guide</a></em>. </div><div>Richardson, S., E. Irvine, R. Froend, P. Boon, S. Barber, and B. Bonneville. 2011a. <em>Australian groundwater-dependent ecosystem toolbox part 1: Assessment framework.</em> Waterlines Report 69. Canberra, Australia: Waterlines.</div>

Geoscience Australia’s Exploring for the Future (EFTF) program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government. Further detail is available at http://www.ga.gov.au/eftf. The National Groundwater Systems (NGS) project, is part of the Australian Government’s Exploring for the Future (EFTF) program, led by Geoscience Australia (https://www.eftf.ga.gov.au/national-groundwater-systems), to improve understanding of Australia’s groundwater resources to better support responsible groundwater management and secure groundwater resources into the future. The project is developing new national data coverages to constrain groundwater systems, develop a new map of Australian groundwater systems and improve data standards and workflows of groundwater assessment to populate a consistent data discovery tool and web-based mapping portal to visualise, analyse and download hydrogeological information. While our hydrogeological conceptual understanding of Australian groundwater systems continues to grow in each State and Territory jurisdiction, in addition to legacy data and knowledge from the 1970s, new information provided by recent studies in various parts of Australia highlights the level of geological complexity and spatial variability in stratigraphic and hydrostratigraphic units across the continent. We recognise the need to standardise individual datasets, such as the location and elevation of boreholes recorded in different datasets from various sources, as well as the depth and nomenclature variations of stratigraphic picks interpreted across jurisdictions to map such geological complexity in a consistent, continent-wide stratigraphic framework that can support effective long-term management of water resources and integrated resource assessments. This stratigraphic units data compilation at a continental scale forms a single point of truth for basic borehole data including 47 data sources with 1 802 798 formation picks filtered to 1 001 851 unique preferred records from 171 367 boreholes. This data compilation provides a framework to interpret various borehole datasets consistently, and can then be used in a 3D domain as an input to improve the 3D aquifer geometry and the lateral variation and connectivity in hydrostratigraphic units across Australia. The reliability of each data source is weighted to use preferentially the most confident interpretation. Stratigraphic units are standardised to the Australian Stratigraphic Units Database (ASUD) nomenclature (https://asud.ga.gov.au/search-stratigraphic-units) and assigned the corresponding ASUD code to update the information more efficiently when needed. This dataset will need to be updated as information grows and is being revised over time. This dataset provides: 1. ABSUC_v1 Australian stratigraphic unit compilation dataset (ABSUC) 2. ABSUC_v1_TOP A subset of preferred top picks from the ABSUC_v1 dataset 3. ABSUC_v1_BASE A subset of preferred base picks from the ABSUC_v1 dataset 4. ABSUC_BOREHOLE_v1 ABSUC Borehole collar dataset 5. ASUD_2023 A subset of the Australia Stratigraphic Units Database (ASUD) This consistent stratigraphic units compilation has been used to refine the Great Artesian Basin geological and hydrogeological surfaces in this region and will support the mapping of other regional groundwater systems and other resources across the continent. It can also be used to map regional geology consistently for integrated resource assessments.

<div>This record presents nine new zircon and titanite U–Pb geochronological data, obtained via Sensitive High Resolution Ion Microprobe (SHRIMP) for seven samples of plutonic rocks from the Lachlan Orogen and the Cobar Basin, plus one garnet-bearing skarn vein from the Cobar region. Many of these new ages improve existing constraints on the timing of mineralisation in the Cobar Basin, as part of an ongoing Geochronology Project (Metals in Time), conducted by the Geological Survey of New South Wales (GSNSW) and Geoscience Australia (GA) under a National Collaboration Framework (NCF) agreement. The results herein (summarised in Table 1.1) correspond to zircon and titanite U–Pb SHRIMP analysis undertaken on GSNSW Mineral Systems projects over July 2017–June 2019.</div><div><br></div><div>Our new data establish an episode of c. 427–425 Ma I-type plutonism, coeval with regional S-type granites, which marginally predated opening of the Cobar Basin. Widespread S-type and high-level I-type magmatism accompanied 423–417 Ma basin development. At least two episodes of skarn-related mineralisation are recognised in the southern Cobar Basin: c. 387 Ma (from pre-mineralisation skarn veins) at Kershaws prospect, and c. 403 Ma at the adjacent Hera mine (Fitzherbert et al., 2021).</div><div><br></div><div>Three intrusive rocks were dated at the Norma Vale prospect in the southwestern Cobar Basin, where calcic iron-copper skarn mineralisation is thought to have been caused by I-type but compositionally complex high-level intrusive rocks emplaced along a northeast-oriented fault related to the nearby Rookery Fault (Fitzherbert et al., 2017). A 423 ± 8 Ma I-type quartz diorite potentially constrains the timing of skarn mineralisation, but is indistinguishable in age from a 421.3 ± 3.0 Ma S-type cordierite-biotite granite and a 417.5 ± 3.3 Ma coarse-grained S-type granite, both from deeper in the same drillhole. These results suggest that at least some of the coeval S-type and high-level I-type magmatic activity accompanying opening of the Cobar Basin was associated with early mineralisation, although skarn-forming processes regionally are complex and episodic (Fitzherbert et al., 2021).</div><div><br></div><div>In the Cobar mining belt, our new date of 422.8 ± 2.8 Ma for I-type rhyolitic porphyry at Carissa Shaft (which is one of the southernmost high-level intrusions associated with the Perseverance and Queen Bee orebodies) is coeval with the 423.2 ± 3.5 Ma ‘Peak rhyolite’ (Black, 2007), but marginally older than the 417.6 ± 3.0 Ma Queen Bee Porphyry (Black, 2005). At Gindoono, a 423.0&nbsp;±&nbsp;2.6&nbsp;Ma unnamed dacitic porphyry intruded and hornfelsed the undated I-type Majuba Volcanics, thereby establishing a minimum age for that unit.</div><div><br></div><div>East of Cobar, the I-type Wild Wave Granodiorite intruded the Ordovician Girilambone Group, but was exhumed and eroded to form clasts within pebble conglomerates of the lowermost Cobar Basin. Its new U–Pb SHRIMP zircon age of 424.1 ± 2.8 Ma constrains the timing of I-type plutonism which marginally predated formation of the Cobar Basin. A similar zircon age of 426.7 ± 2.3 Ma was obtained from the concealed Fountaindale Granodiorite north of Condoblin, indicating that this I-type pluton is coeval with the nearby and much larger c. 427 Ma S-type Erimeran Granite. Titanite from the same sample of Fountaindale Granodiorite yielded an age of 421.6 ± 2.7 Ma, which is significantly younger than the zircon age, and is interpreted to constrain the timing of ‘deuteric’ (chlorite-albite-epidote-titanite-sericite-carbonate) alteration during post-magmatic hydrothermal activity (e.g. Blevin, 2003b).</div><div><br></div><div>A garnet-bearing skarn vein at Kershaws prospect, adjacent to the Hera orebody (Fitzherbert et al., 2021), predates the main phase of mineralisation, and yielded a titanite age of 387.2 ±&nbsp;6.2&nbsp;Ma. This indicates that the skarn-forming hydrothermal event at Kershaws prospect is significantly younger than the c. 403 Ma age for the main mineralising event at Hera mine (Fitzherbert et al., 2021).</div>

<div>Defining and characterising groundwater aquifers usually depends on the availability of data necessary to represent its spatial extent and hydrogeological properties, such as lithological information and aquifer pump test data.&nbsp;In regions where such data is of limited availability and/or variable quality, the characterisation of aquifers for the purposes of water resource assessment and management can be problematic.&nbsp;The Upper Darling River Floodplain region of western New South Wales, Australia, is an area where communities, natural ecosystems and cultural values are dependent on both surface and groundwater resources.&nbsp;Owing to a relative paucity of detailed geological and hydrogeological data across the region we apply two non-invasive geophysical techniques—airborne electromagnetics and surface magnetic resonance—to assist in mapping and characterising the regional alluvial aquifer system.&nbsp;The combination of these techniques in conjunction with limited groundwater quality data helps define an approximate extent for the low salinity alluvial aquifer in a key part of the Darling River valley system and provides insights into the relative water content and its variation within the aquifer materials.&nbsp;This work demonstrates the utility of these key geophysical data in developing a preliminary understanding of aquifer geometry and heterogeneity, thereby helping to prioritise targets for follow-up hydrogeological investigation. Presented at the 2024 Australian Society of Exploration Geophysicists (ASEG) Discover Symposium

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>

<div>This Record documents the efforts of Geoscience Australia (GA) in compiling a New South Wales (NSW) Uranium–Lead (U–Pb) geochronology interpreted age compilation (version 1.0), utilising the MinView data from the Geological Survey of New South Wales (GSNSW), GA’s ‘in house’ storage of SHRIMP (Sensitive High Resolution Ion Micro Probe) ages, and other disparate publication sources e.g. academic journal articles and university theses. Here we describe both the dataset itself and the process by which it is incorporated into the continental-scale Isotopic Atlas of Australia. This initial release of the NSW geochronology compilation comprises of 1007 U–Pb ages of named and unnamed rock units in NSW.&nbsp;</div><div><br></div><div>The Isotopic Atlas draws together age and isotopic data from across the country and provides visualisations and tools to enable non-experts to extract maximum value from these datasets. Data is added to the Isotopic Atlas in a staged approach with priorities determined by GA- and partner-driven focus regions and research questions. This NSW U–Pb compilation represents the third in a series of compilation publications (Records and Datasets) for the southern states of Australia, which are a foundation for the second phase of the Exploring for the Future initiative over the period 2020–2024. All geochronology compilations in this series of Isotopic Atlas of Australia Records are available online from the Geochronology and Isotopes Data Portal. The most current data can be accessed and downloaded from GA’s Geochronology and Isotopes Data Portal.

The Great Artesian Basin Research Priorities Workshop, organised by Geoscience Australia (GA), was held in Canberra on 27 and 28 April 2016. Workshop attendees represented a spectrum of stakeholders including government, policy, management, scientific and technical representatives interested in GAB-related water management. This workshop was aimed at identifying and documenting key science issues and strategies to fill hydrogeological knowledge gaps that will assist federal and state/territory governments in addressing groundwater management issues within the GAB, such as influencing the development of the next Strategic Management Plan for the GAB. This report summarises the findings out of the workshop.

The Pre-Cenozoic Geology of South Australia, New South Wales and Victoria removes Cenozoic geology. It is largely based on (1) the 1:1,000,000 Surface Geology by Geoscience Australia (2012) for New South Wales; (2) the Victoria seamless geology (2014); and (3) solid geology layers of South Australia by the Geological Survey of South Australia (2016), plus interpretation in GA of potential filed geophysical datasets, particularly magnetic data. The South Australia solid geology layers available on SARIG were used for Archaean to Ordovician geology of the state. Post-Ordovician geology of South Australia were interpreted in GA using magnetic data. The 1:1,000,000 surface geology map of the Mount Painter Region by S.B. Hore (2015) was also used. Solid geology was produced with the aid of interpretation of magnetic data for that region. For the Murray Basin and surrounding areas drill hole data were used to determine the geology under cover. Because extents of drill hole intercepted geology are not know in most cases. Such geology are shown as tiny circular polygons. The author thanks a number of state and GA geologists for their inputs at various stages of the project, particularly those who reviewed the data.

<div>This report presents the findings of a study conducted in the upper Darling River floodplain, aimed at improving optical and interferometric synthetic aperture radar (InSAR) remote sensing products for groundwater dependant vegetation (GDV) characterisation. The research was part of the Upper Darling Floodplain (UDF) groundwater study, funded by the Exploring for the Future program.</div><div>This work tests the suitability of two novel remote sensing methods for characterising ecosystems with a range of likely groundwater dependence: combined wetness and greenness indices derived from Landsat products available through Geoscience Australia’s Digital Earth Australia platform, and an InSAR derived index of vegetation structure (known as SARGDE), which has been so far tested only in northern Australia. In addition, the relationship between the Normalised Difference Vegetation Index (NDVI), a remotely sensed proxy for vegetation condition, and water availability from surface water flows, rainfall, and groundwater was tested for sites with a range of low to high likely groundwater dependence.&nbsp;</div><div>The key findings of this work, and potential implications, are:</div><div>• A multiple lines of evidence approach, drawing on persistence of wetness/greenness and vegetation structure, and correlation between inferred vegetation condition and groundwater levels, gives high confidence in the groundwater dependence of parts of the floodplain, particularly within the riparian zone. These indices require calibration with ground condition data to be applied in different regions, but a combined index could provide a high confidence measure of groundwater dependence.</div><div>• Combined greenness and wetness, SARGDE, and the relationship between NDVI and groundwater levels all showed areas classified as ‘moderate’ likelihood of groundwater dependence having signatures comparable to areas classified as high likelihood. This could address a shortcoming of the groundwater dependence classification methodology, which, when groundwater level information is missing, classifies some vegetation types as moderate.</div><div>• A combined index taking into account both greenness and wetness was able to better delineate vegetation types with a range of groundwater dependence previously not achievable using remote sensing products.&nbsp;</div><div>This work has provided improved methodology for applying remote sensing products to groundwater dependent vegetation characterisation in the study area. The methods are likely to be applicable to other regions with groundwater dependent vegetation. The results add to the evidence that it is necessary to better integrate surface and groundwater resources in water sharing plans at a basin scale. Further work is required to quantify the frequency and magnitude of flow events required to replenish alluvial groundwater sufficiently to maintain existing groundwater dependent ecosystems.&nbsp;&nbsp;</div><div><br></div><div><br></div>