Vlaming Sub-Basin Marine Environmental Survey (GA-0334/S. Supporter GP1373)(NCIP Program) - High Resolution Backscatter grids

Authors / CoAuthors

Siwabessy, J.

Abstract

Geoscience Australia undertook a marine survey of the Vlaming Sub-basin in March and April 2012 to provide seabed and shallow geological information to support an assessment of the CO2 storage potential of this sedimentary basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2 within reasonable distances of major sources of CO2 emissions. The Vlaming Sub-basin is located offshore from Perth, Western Australia, and was previously identified by the Carbon Storage Taskforce (2009) as potentially highly suitable for CO2 storage. The principal aim of the Vlaming Sub-basin marine survey (GA survey number GA334) was to look for evidence of any past or current gas or fluid seepage at the seabed, and to determine whether these features are related to structures (e.g. faults) in the Vlaming Sub-basin that may extend up to the seabed. The survey also mapped seabed habitats and biota in the areas of interest to provide information on communities and biophysical features that may be associated with seepage. This research addresses key questions on the potential for containment of CO2 in the Early Cretaceous Gage Sandstone (the basin's proposed CO2 storage unit) and the regional integrity of the South Perth Shale (the seal unit that overlies the Gage Sandstone). This dataset comprises high resolution backscatter grids.

Product Type

dataset

eCat Id

82975

Contact for the resource

Custodian

EGD

Owner

Commonwealth of Australia (Geoscience Australia)

Custodian

Commonwealth of Australia (Geoscience Australia)
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia

Digital Object Identifier

http://dx.doi.org/10.4225/25/54EA963522229

Keywords

Marine DataBackscatter Grid

( Theme )

backscatter

( Theme )

continental shelf

( Theme )

environmental

( Theme )

marine environmental baselines

( Theme )

marine survey

( Theme )

marine

Australian and New Zealand Standard Research Classification (ANZSRC)

Environmental Sciences

Published_External

Publication Date

2013-01-01T00:00:00

Creation Date

Security Constraints

Australian Government Security ClassificationSystem

Classification - unclassified

Legal Constraints

Creative Commons Attribution 4.0 International Licence

Access - license

Use - license

Status

Purpose

Maintenance Information

asNeeded

Topic Category

geoscientificInformation

Series Information

Lineage

The Vlaming Sub-Basin survey, GA-0334 GP1373 was acquired by Geoscience Australia onboard the RV Southern Supporter from the 17th of March to the 20th of April 2012. The GA representative onboard was Mr. George Bernardel. This dataset was acquired and processed onboard by Fugro and further reprocessing of the data was conducted in the office by Cameron Buchanan and by Michele Spinoccia, using CARIS HIPS & SIPS ver 7.1.2. The naming of the raw bathymetry data had to be changed to show the date, time and vessel. Then the timing of the raw and the processed data needed to matched as the raw and processed bathymetry data timing did not match. Then the navigation for different files/days were missing and needed to be loaded and merged with the rest of the dataset. 1. First a vessel configuration file was created where the co-ordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. 2. A new project was then created and the vessel configuration file was attached to the project file. 3. The raw swath sonar data, in raw.all format, for each line was then imported into the project and the vessel information assigned to the data. 4. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artifacts. 5. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. 6. Then a new blank field area was defined that specified the geographic area of study and the co-ordinate system used. The co-ordinates for the study areas were WGS84 UTM-50S. 7. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artifacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. 8. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. In GA the tide was applied to the grid to correct for tidal variations and velocity corrections were performed to correct for different artifacts and mismatches. 9. The processed data was finally exported as grids soundings or false colored images for presentation and reporting and as final processed data in in ASCII XYZ as well as geotif formats of 50m resolution. 10-Using CARIS Base editor 4.0 the grids were exported as ESRI ASCII grid, then imported into ARC catalogue/info to create a raster file for the entire survey.

Parent Information

Extents

[-32.35, -31.79, 115.24, 115.74]

Reference System

Spatial Resolution

Service Information

Associations

Downloads and Links