Authors / CoAuthors
Spinoccia, M.
Abstract
The TOPAS Sea Trials survey GA-2361, was acquired by Geoscience Australia after the installation of the new Sub bottom profiler (TOPAS) onboard the RV Southern Surveyor during the 9th and the 10th of December 2004. The survey loacation was offshore Brisbane. The aim of the survey was to test the new sub bottom profiler installed onboard. The bathymetry grids consists of 5,10 and 40 resolution projected in Easting and Northing WGS84, UTM56S.<p><p>This dataset is not to be used for navigational purposes.
Product Type
dataset
eCat Id
75662
Contact for the resource
Custodian
Owner
Custodian
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Keywords
- Australian and New Zealand Standard Research Classification (ANZSRC)
-
- Earth Sciences
- ( {1} )
-
- HVC_144641
- ( Project )
-
- AusSeabed
- ( {1} )
-
- Marine Data Bathymetry Grid
- ( Theme )
-
- bathymetry
- ( Theme )
-
- continental shelf
- ( Theme )
-
- marine survey
- ( Theme )
-
- marine
- ( {1} )
-
- AU-QLD
- ( {1} )
-
- Published_External
Publication Date
2013-01-01T00:00:00
Creation Date
Security Constraints
Legal Constraints
Status
Purpose
Maintenance Information
asNeeded
Topic Category
geoscientificInformation
Series Information
Lineage
The multibeam bathymetry was acquired by the following survey: - Survey Name: GA-2361 TOPAS Sea Trials - Vessel Name: RV Southern Surveyor - Institution: Geoscience Australia - Country: Australia - Operator: CSIRO - Multibeam system: Kongsberg EM300 - Year of installation: 2004 - Nominal sonar frequency: 30 kHz - Number of beams: 135 beams - Beamwidth across track: 1 degree - Beamwidth alon track: 1 degree - Pulse length: variable - Selectable depth range: 10m - 5000m - Vessel speed: 7 - 8 knots - Start Date: 09/12/2005 - End Date: 10/12/2005 - Start Port: Brisbane - End Port: Brisbane The TOPAS Sea Trials survey, GA-2361, was acquired by Geoscience Australia onboard the RV Southern Surveyor from the 9th of December to the 10th of December 2004. The Chief scientist onboard was Mr. Fred Kroh. This dataset was acquired and processed onboard by Cameron Buchanan and further processing was conducted in the office by Michele Spinoccia, using CARIS HIPS & SIPS ver 7.1.2. 1. First a vessel configuration file was created where the co-ordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. 2. A new project was then created and the vessel configuration file was attached to the project file. 3. The raw swath sonar data, in raw.all format, for each line was then imported into the project and the vessel information assigned to the data. 4. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artifacts. 5. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. 6. Then a new blank field area was defined that specified the geographic area of study and the co-ordinate system used. The co-ordinates for the study areas were WGS84 UTM-56S. 7. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artifacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. 8. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. In GA the tide was applied to the grid to correct for tidal variations and velocity corrections were performed to correct for different artifacts and mismatches. 9. The processed data was finally exported as grids soundings or false colored images for presentation and reporting and as final processed data in in ASCII XYZ as well as geotif formats of 5,10 and 40m resolution. 10- Using CARIS Base editor 4.0 the grids were exported as ESRI ASCII grid, then imported into ARC catalogue/info to create a raster file for the entire survey.
Parent Information
Extents
[-27.45, -26.61, 153.07, 154.78]
Reference System
Spatial Resolution
Service Information
Associations
Downloads and Links
Source Information
Geoscience Australia 153.07 154.78 -27.45 -26.61