This database contains geochemical data for samples analysed both for inorganic and organic geochemistry. Analytical data are sourced from Geoscience Australia's Inorganic Geochemistry Database (OZCHEM) and Organic Geochemistry Database (ORGCHEM), respectively. The data are joined on a unique sample number. Inorganic geochemical data cover the majority of the periodic table, with metadata on analytical methods and detection limits. Organic geochemical data include results of pyrolysis, derivative calculated values, and, where available, isotopic composition of carbonates (D13C) and isotopic composition of rock nitrogen (D15N). Further, there are provisions for delivery of isotopic data for kerogen (H, C, N) and oxygen (O) for carbonates. Where available, sample descriptions include stratigraphic unit names and ages, and lithology. Location information includes coordinates of the sampled feature (eg, borehole), coordinates of the sample and sample depth. Interpretation of the combined inorganic and organic geochemistry for organic-rich shales will facilitate comprehensive characterisation of hydrocarbons source rocks and mineral commodities source and trap environments. All are achieved within the frameworks of petroleum and mineral systems analysis. The initial data delivered by this service include 1785 samples from 35 boreholes from 14 geological provinces, including recently released data for 442 samples from the South Nicholson National Drilling Initiative Carrara 1 stratigraphic drill hole (Butcher et al., 2021; Carson et al., 2021). Many sampled boreholes are located within the polygon of the Exploring for the Future Barkly-Isa-Georgetown project. This dataset will be updated periodically as more data become available.

<b>IMPORTANT NOTICE:</b> This web service has been deprecated. The Hydrochemistry Service OGC service at https://services.ga.gov.au/gis/hydrogeochemistry/ows should now be used for accessing Geoscience Australia hydrochemistry analyses data. This is an Open Geospatial Consortium (OGC) web service providing access to hydrochemistry data (groundwater analyses) obtained from water samples collected from Australian water bores.

Brumbys 1 was an appraisal well drilled and cored through Brumbys Fault at the CO2CRC Otway International Test Centre in 2018. The Otway Project is located in South West Victoria, on private farming property approximately 35 km southeast of Warrnambool and approximately 10 km northwest of the town of Peterborough. Total measured depth was 126.6 m (80 degrees). Sonic drilling enabled excellent core recovery and the borehole was completed as a groundwater monitoring well. Brumbys 1 cores through the upper Hesse Clay, Port Campbell Limestone and extends into the Gellibrand Marl. This dataset compiles the extensive analysis undertaken on the core. Analysis includes: Core log; Foram Analysis; Paleodepth; % Carbonate (CaCO3); X-Ray Fluorescence Spectrometry (XRF); Inductively Coupled Plasma Mass Spectrometry (ICP-MS); X-Ray Diffraction (XRD); Grain Size; Density; Surface Area Analysis (SAA); Gamma. Samples were taken at approximately 1-2 m intervals.

<b>IMPORTANT NOTICE:</b> This web service has been deprecated. The Australian Onshore and Offshore Boreholes OGC service at https://services.ga.gov.au/gis/boreholes/ows should now be used for accessing Geoscience Australia borehole data. This is an Open Geospatial Consortium (OGC) web service providing access to a subset of Australian geoscience samples data held by Geoscience Australia. The subset currently relates specifically to Australian Boreholes.

<b>IMPORTANT NOTICE: </b>This web service has been deprecated. The Australian Onshore and Offshore Boreholes OGC service at https://services.ga.gov.au/gis/boreholes/ows should now be used for accessing Geoscience Australia borehole data. This is an Open Geospatial Consortium (OGC) web service providing access to a subset of Australian geoscience samples data held by Geoscience Australia. The subset currently relates specifically to Australian Boreholes.

<b>Legacy service retired 29/11/2022</b> This is an Open Geospatial Consortium (OGC) web service providing access to Australian onshore and offshore borehole data conforming to the GeoSciML version 4.0 specification. The borehole data includes Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types. The dataset has been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources.

<b>Legacy service Retired 29/11/2022 IMPORTANT NOTICE: </b>This web service has been deprecated. The Australian Onshore and Offshore Boreholes OGC service at https://services.ga.gov.au/gis/boreholes/ows should now be used for accessing Geoscience Australia borehole data. This is an Open Geospatial Consortium (OGC) web service providing access to Australian onshore and offshore borehole data. This web service is intended to complement the borehole GeoSciML-Portrayal v4.0 web service, providing access to the data in a simple, non-standardised structure. The borehole data includes Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types. The dataset has been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources.

<b>Legacy service retired 29/11/2022 IMPORTANT NOTICE:</b> This web service has been deprecated. The Australian Onshore and Offshore Boreholes OGC service at https://services.ga.gov.au/gis/boreholes/ows should now be used for accessing Geoscience Australia borehole data. This is an Open Geospatial Consortium (OGC) web service providing access to Australian onshore and offshore borehole data. This web service is intended to complement the borehole GeoSciML-Portrayal v4.0 web service, providing access to the data in a simple, non-standardised structure. The borehole data includes Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types. The dataset has been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources.

<div>Geoscience Australia has a large holding of surface sediment samples, such as stream and overbank sediments, from geochemical surveys conducted over more than 50 years across the Australian continent. Geochemical data from these surface materials are of national importance as they can contribute significantly to establishing geochemical environmental baselines and their use in land management, as well as aiding in the discovery of new mineral deposits. Samples from these legacy surveys provide valuable insights into areas of Australia that are remote, difficult to access, or have since been developed. The age of a large number of these surveys, however, means that the original results included data for a&nbsp;smaller range of chemical elements, typically with poorer analytical precision and accuracy than those of modern surveys. This small range of chemical elements also typically doesn’t include important elements for modern use, such as critical minerals (i.e. Co, Bi, REEs), which are increasing in their importance. As part of Geoscience Australia’s Exploring for the Future program, a collection of over 9000 samples from these surveys was reanalysed using modern analytical techniques for a&nbsp;suite of 60 chemical elements. These samples cover several regions within Australia, including Kakadu, Cape York, the Mount Isa region, and near the Canberra region. The new analytical data maximise the value of the historical geochemical surveys and will provide new insights into the mineral potential of these regions and improve the quality of geochemical environmental baselines.&nbsp;</div><div><br></div><div>This data release includes: 1) information on the surveys and their samples; 2) quality assurance results; 3) a discussion of sample preparation and analytical methods used; 4) results for total content geochemistry (XRF and LA-ICP-MS); and 5) individual element maps for each of the regions for preliminary interpretation of the data.</div><div><br></div><div>Acquisition and release of this dataset forms part of a larger program aimed at creating a levelled geochemical baseline for the whole Australia (Main and Champion, 2020).</div>

<div>Heavy rare earth elements are essential in renewable energy and high-tech products. Some natural rare earth element (REE) deposits exhibit heavy rare earth element (HREE) enrichment from &lt;&nbsp;10% to ~85% of the REE budget (Williams-Jones et al., 2015). </div><div><br></div><div>Controls on REE fractionation in hydrothermal systems are imposed by (1) changes in the relative stability of REE aqueous complexes with temperature (Migdisov et al., 2016) and (2) incorporation or rejection of REE by crystalline structures. Also, the REEs are invariably found as solid solutions but not as pure minerals. REE and yttrium (Y) sulphate complexes are some of the most stable REE and Y aqueous species in hydrothermal fluids (Migdisov and William-Jones, 2008, 2016; Guan et al., 2022) and may be responsible for REE transport and deposition in sediment-hosted deposits. Within the unconformity-related deposits, REEs are hosted mostly by xenotime ((Y,Dy,Er,Tb,Yb)PO4) and minor florencite ((La,Ce)Al3(PO4)2(OH)6) (Nazari-Dehkordi et al., 2019). Modelling the stability of xenotime in the H-O-Cl-(±F)-S-P aqueous system is critical for understanding HREE enrichment in this mineral system.</div><div><br></div><div>We use a newly derived thermodynamic dataset depos for REESO4+ and REE(SO4)2‑ aqueous complexes to generate stability diagrams illustrating mechanisms of REE transport and deposition in the above deposits. Sulphate REE complexes may dominate even in chloride-rich brines and facilitate REE mobilization in acid oxidizing environments. Previously Nazari-Dehkordi et al. (2019) proposed an ore genesis model involving the mixing of discrete hydrothermal fluids that separately carried REE + yttrium and phosphorus. The speciation model that includes sulphate complexes expands this scenario; a process resulting in fluid neutralization or reduction will also promote precipitation of xenotime enriched in HREEs.&nbsp;</div><div><br></div>This Abstract was submitted/presented to the 2022 Specialist Group in Geochemistry, Mineralogy and Petrology (SGGMP) Conference 7-11 November (https://gsasggmp.wixsite.com/home/biennial-conference-2021)