Bynoe Harbour Habitat Mapping Survey 2016: Total oxygen uptake and total carbon dioxide release from core incubation experiments.
This resource contains surface sediment data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and Department of Land Resource Management (Northern Territory Government) during the period from 2-29 May 2016 on the RV Solander (survey SOL6432/GA4452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; 2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles.
This dataset comprises O2 consumption and CO2 production rates measured from core incubation experiments conducted on seabed sediments.
A detailed account of the survey is provided in Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T., 2016. Bynoe Harbour Marine Survey 2017: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra.
Thanks to the crew of the RV Solander for help with sample collection, Matt Carey, Craig Wintle and Andrew Hislop from the Observatories and Science Support at Geoscience Australia for technical support and Jodie Smith for reviewing the data. This dataset is published with the permission of the CEO, Geoscience Australia
Simple
Identification info
- Date (Creation)
- 2016-10-27T15:40:00
- Date (Publication)
- 2017-04-24T11:00:00
- Date (Revision)
- 2018-06-20T00:17:32
- Date (Revision)
- 2019-04-08T05:58:06
- Citation identifier
- Geoscience Australia Persistent Identifier/https://pid.geoscience.gov.au/dataset/ga/102580
- Cited responsible party
-
Role Organisation / Individual Name Details Author Radke, L.C.
1 Co-author Carey, M.
2 Co-author Wintle, C.
3 Co-author Tubby, J.
4
- Status
- Point of contact
-
Role Organisation / Individual Name Details Custodian Radke, L.C.
Point of contact Commonwealth of Australia (Geoscience Australia)
Voice
- Spatial representation type
- Topic category
-
- Oceans
Extent
Temporal extent
- Time period
- 2016-05-03T00:00:00 2016-10-26T00:00:00
Extent
))
- Maintenance and update frequency
- As needed
Resource format
- Title
-
Product data repository: Various Formats
- Website
-
Data Store directory containing the digital product files
Data Store directory containing one or more files, possibly in a variety of formats, accessible to Geoscience Australia staff only for internal purposes
- Keywords
-
-
tropical
-
- Keywords
-
-
coastal
-
- Keywords
-
-
benthic flux
-
- Keywords
-
-
Published_External
-
Resource constraints
- Title
-
Creative Commons Attribution 4.0 International Licence
- Alternate title
-
CC-BY
- Edition
-
4.0
- Access constraints
- License
- Use constraints
- License
Resource constraints
- Title
-
Australian Government Security ClassificationSystem
- Edition date
- 2018-11-01T00:00:00
- Classification
- Unclassified
- Language
- English
- Character encoding
- UTF8
Distribution Information
- Distributor contact
-
Role Organisation / Individual Name Details Distributor Commonwealth of Australia (Geoscience Australia)
Voice
- OnLine resource
-
Download the data (xlsx)
Download the data (xlsx)
- Distribution format
-
-
xlsx
-
- OnLine resource
-
Link to collection record
Link to collection record
Resource lineage
- Statement
-
Bottom sediments were collected using a Smith McIntyre grab. Two 5 cm diameter cores of surface sediments were extracted from the grabs by hand-pushing 5 cm diameter core barrels into the sediments. The cores were overlain with 0.153 L of filtered (2 um) and uv-treated seawater and then were incubated in the dark for ~4-6 hours at ~25oC after a ~3 hour pre-incubation period. Dissolved oxygen levels were measured at ~30 minute intervals using the Presens technology. Samples for dissolved inorganic carbon (DIC) analysis were taken at the start and finish of each incubation. Blank cores comprising filtered and uv-treated seawater only accompanied all incubations. DIC concentrations were determined using a DIC analyser and infrared-based CO2 detector (Geoscience Australia). CO2 production and O2 consumption rates were calculated by concentration differences (T=1 - T=0) over the course of the incubation. Accuracy of O2 measurements was ± 0.1 mg L-1. The %RSDs of the precisions and accuracies of the dissolved inorganic carbon analyses were both 0.6. The O2 consumption and CO2 production rates of the 3 blank samples run in duplicate at the start and end of the field campaign, and midway, were -3.5 ± 2.2 and -1.5 ± 6.5 mmol m-2 d-1 respectively.
Nutrient fluxes (NOx, DIN, NO2, N2, SiO4 and PO4) were undertaken at two stations on duplicate cores during the first leg of the voyage. Dissolved nutrients were determined by Segmented Flow Analysis - SEAL AA3 (method: Ryle V.D., Mueller H.R. and Gentien P.(1981). Automated Analysis of Nutrients in Tropical Seawaters, AIMS Oceanography Series Tech. Bulletin No.3, AIMS.OS.81.2) at the Townsville Laboratories of the Australian Institute of Marine Sciences. Dissolved N2 gas concentrations were determined using Membrane Inlet Mass spectrometry (MIMS) at the Ecochemistry Laboratory (University of Canberra) following methods and calculation protocols described in Kana et al. (1994 & 1998) and using the solubility constants of Weiss (1970).
Kana, T. M., C. Darkangelo, M. D. Hunt, J. B. Oldham, G. E. Bennett & J. C. Cornwell, 1994. Membrane inlet mass spectrometer for rapid high-precision determination of N2, O2 and Ar in environmental water samples. Analytical Chemistry 66/23: 4166-4170.
Kana, T.M., Sullivan, M.B., Cornwell J.C. and Groszkowski, K. 1998. Denitrification in estuarine sediments determined by membrane inlet mass spectrometry. Limnology and Oceanography 43: 334-339.
Weiss, R.F., 1970, The solubility of nitrogen, oxygen and argon in water and seawater: Deep-Sea
Research, vol. 17, p. 721-735.
Weiss, R.F., 1970, The solubility of nitrogen, oxygen and argon in water and seawater: Deep-Sea
Research, vol. 17, p. 721-735.
- Hierarchy level
- Dimension group
Metadata constraints
- Title
-
Australian Government Security ClassificationSystem
- Edition date
- 2018-11-01T00:00:00
- Classification
- Unclassified
Metadata
- Metadata identifier
-
urn:uuid/e648f41a-1d05-4ce1-b4e8-589c06956837
- Title
-
GeoNetwork UUID
- Language
- English
- Character encoding
- UTF8
- Contact
-
Role Organisation / Individual Name Details Point of contact Radke, L.C.
Commonwealth of Australia (Geoscience Australia)
Voice
Type of resource
- Resource scope
- Dataset
- Name
-
Dataset
Alternative metadata reference
- Title
-
Geoscience Australia - short identifier for metadata record with
uuid
- Citation identifier
- eCatId/102580
- Date info (Creation)
- 2016-10-27T15:32:48
- Date info (Revision)
- 2018-04-22T08:38:55
Metadata standard
- Title
-
AU/NZS ISO 19115-1:2014
Metadata standard
- Title
-
ISO 19115-1:2014
Metadata standard
- Title
-
ISO 19115-3
- Title
-
Geoscience Australia Community Metadata Profile of ISO 19115-1:2014
- Edition
-
Version 2.0, September 2018
- Citation identifier
- https://pid.geoscience.gov.au/dataset/ga/122551