Authors / CoAuthors
Grove, R.
Abstract
These datasets cover approximately 1650 sq km in the central sector of the Bundaberg Regional Council and are part of the 2009 Capricorn Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - LAS ground classified returns in XYZ - LAS non-ground classified returns in XYZ - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape
Product Type
dataset
eCat Id
74323
Contact for the resource
Custodian
Custodian
Lev 2, Landcentre, Cnr Main and Vulture GPO Box 2454
Woolloongabba
QLD
4001
Australia
Point of contact
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Keywords
-
- DEM topographic
- ( Theme )
-
- marine
-
- AU-QLD
- Australian and New Zealand Standard Research Classification (ANZSRC)
-
- Topology
-
- Published_Internal
Publication Date
2011-01-01T00:00:00
Creation Date
Security Constraints
Legal Constraints
Special, MOU, etc.
Access - restricted
Use - license
Status
Purpose
Maintenance Information
unknown
Topic Category
elevation
Series Information
Lineage
Airborne Laser Scanning (ALS) data was acquired for the Capricorn Coast project from a fixed wing aircraft between 08 September 2009 and 19 October 2009. Acquisition over tidal areas was undertaken within +/- 2 hours of low tide. DATA PROCESSING Fugro Spatial Solutions Pty Ltd aim is to select those points that are part of a clean ground surface, which might not be 100% of the ground hits. This results in a cleaner dataset, without compromising on terrain detail and accuracy. Ground filtering algorithms, tailored for this project, data type and terrain type, are applied to the full dataset. The ground filtered dataset is then visually checked by an operator, and incorrectly classified data is corrected or the ground filtering algorithm is adjusted and then visually checked. For the verification of the ground classifications, intensity imagery is used as a backdrop image. Any LiDAR return, not classified as ground, but higher than ground (>30cm above ground), is classified as non-ground return. Classified Point Cloud with automatically classified buildings: The full LiDAR point cloud, consisting of ground, automatically classified buildings and the rest of the point cloud. Bare_Earth_DEM_1m: A 1m DEM has been generated from the LiDAR ground surface. The method of deriving the height for each grid point is by linear triangulation between the three nearest LiDAR ground points. Contours: From the ground dataset, triangles are being built. At 0.25m intervals in height, points or interpolated points on triangle edges with that same height are being connected using slightly smoothed curved lines. The lines for each height interval are then merged to become the final contours. Note: Returns on water have not been removed from the (classified) point clouds. Gridded datasets have been interpolated across voids (up to 500m in diameter) caused by either no-return due to water bodies, or removal of buildings, vegetation or other above ground features. Contour datasets are interpolated across voids, and contours across waterbodies have not been removed/clipped. Above ground datasets only start at 30cm above the classified ground surface, to avoid low grasses/system noise to become part of this above ground dataset.
Parent Information
Extents
[-25.2379, -24.6102, 151.6298, 152.2492]
Reference System
GDA94 / MGA zone 56 (EPSG:28356)
Spatial Resolution
Service Information
Associations
Downloads and Links
Source Information
These datasets cover approximately 1650 sq km in the central sector of the Bundaberg Regional Council and are part of the 2009 Capricorn Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - LAS ground classified returns in XYZ - LAS non-ground classified returns in XYZ - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape