Authors / CoAuthors
Grove, R.
Abstract
These datasets cover approximately 17 sq km over all of Yam Island within the Torres Strait Island Regional Council and are part of the 2010 Torres Strait Islands LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape
Product Type
dataset
eCat Id
74322
Contact for the resource
Custodian
Custodian
Lev 2, Landcentre, Cnr Main and Vulture GPO Box 2454
Woolloongabba
QLD
4001
Australia
Point of contact
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Keywords
-
- DEM topographic
-
- AU-QLD
- Australian and New Zealand Standard Research Classification (ANZSRC)
-
- Topology
-
- Published_Internal
Publication Date
2011-01-01T00:00:00
Creation Date
Security Constraints
Legal Constraints
Special, MOU, etc.
Access - restricted
Use - license
Status
Purpose
Maintenance Information
unknown
Topic Category
elevation
Series Information
Lineage
Airborne Laser Scanning (ALS) data was acquired over Yam Island from a fixed wing aircraft on the 16 August 2010.
Parent Information
Extents
[-9.9193, -9.8829, 142.7512, 142.7966]
Reference System
GDA94 / MGA zone 54
Spatial Resolution
Service Information
Associations
Downloads and Links
Source Information
These datasets cover approximately 17 sq km over all of Yam Island within the Torres Strait Island Regional Council and are part of the 2010 Torres Strait Islands LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape