Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. These line dataset from the Murrindal, Vic, 1996 VIMP Survey (GSV3060) survey were acquired in 1995 by the VIC Government, and consisted of 15589 line-kilometres of data at 200m line spacing and 80m terrain clearance. To constrain long wavelengths in the data, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey data. This survey data is essentially levelled to AWAGS.

The radiometric, or gamma-ray spectrometric method, measures the natural variations in the gamma-rays detected near the Earth's surface as the result of the natural radioactive decay of potassium (K), uranium (U) and thorium (Th). The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. The total dose rate is due to natural sources of radiation and is computed by adding estimates of cosmic dose at ground level to the terrestrial dose. The terrestrial dose rate grid is derived as a linear combination of the filtered K, U and Th grids. A low pass filter is applied to this grid to generate the filtered total dose rate grid. This Gawler Craton Airborne Survey Merge Radiometrics - dose rate grid (AWAGS) has a cell size of 0.0004 degrees (approximately 41m) and shows the total dose rate of the Gawler Craton Airborne Survey Magnetic Radiometric and DEM Merge, SA, 2017-2019 survey. The data used to produce this grid was acquired in 2019 by the SA Government, and consisted of 1660000 line-kilometres of data at 200m line spacing and 60m terrain clearance.

The radiometric, or gamma-ray spectrometric method, measures the natural variations in the gamma-rays detected near the Earth's surface as the result of the natural radioactive decay of potassium (K), uranium (U) and thorium (Th). The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This radiometric thorium grid has a cell size of 0.00042 degrees (approximately 44m) and shows thorium element concentration of the Jubilee, WA, 2010 (South Officer 1) in units of parts per million (or ppm). The data used to produce this grid was acquired in 2010 by the WA Government, and consisted of 184296 line-kilometres of data at 200m line spacing and 50m terrain clearance.

The Digital Elevation Model represents ground surface topography between points of known elevation. The elevation data was calculated using the altimeters and Global Positioning System (GPS) sensor used for the benefit of airborne magnetic and radiometric data on the same survey. The elevation is the height relative to the Australian Height Datum GDA94 (AUSGEOID09). The processed elevation data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. These line dataset from the Northern Bowen Basin, Qld, 2002 survey were acquired in 2002 by the QLD Government, and consisted of 59476 line-kilometres of data at 400m line spacing and 80m terrain clearance.

Gravity data measures small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This St Arnaud Region Gravity (P198044) contains a total of 597 point data values acquired at a spacing between 100 and 7000 metres. The data is located in VIC and were acquired in 1980, under project No. 198044 for Geological Survey of Victoria (GSV).

Gravity data measures small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This Barabba, Mallala, Balaklava Detailed Gravity (P197665) contains a total of 93 point data values acquired at a spacing between 700 and 1500 metres. The data is located in SA and were acquired in 1976, under project No. 197665 for Department of Mines and Energy South Australia (SADME).

Gravity data measures small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This Otway Basin Seismic line gravity line 4(part), 5, 6, 7, 8 (P199201) contains a total of 905 point data values acquired at a spacing of 300 metres. The data is located in SA, VIC and were acquired in 1992, under project No. 199201 for Bureau of Mineral Resources (BMR); Department of Mines (Victoria).

Gravity data measures small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This Casterton Coleraine Infill (P199630) contains a total of 506 point data values acquired at a spacing between 1000 and 2000 metres. The data is located in SA, VIC and were acquired in 1996, under project No. 199630 for None.

The Digital Elevation Model represents ground surface topography between points of known elevation. The elevation data was calculated using the altimeters and Global Positioning System (GPS) sensor used for the benefit of airborne magnetic and radiometric data on the same survey. The elevation is the height relative to the Australian Height Datum GDA94 (AUSGEOID09). The processed elevation data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. These line dataset from the Perth Basin North, WA, 2011 survey were acquired in 2011 by the WA Government, and consisted of 93199 line-kilometres of data at 400m line spacing and 60m terrain clearance.